S.I.A.I.

LATERIZI ALVEOLATER BIO CLASSE 60

ALVEOLATER® lightweight blocks with horizontal holes are lightened clay bricks, characterized by a gross bulk density between 500 and 680 kg/m³ and a hole percentage of 55% ≤ φ ≤ 70%. They are suitable for building infill walls, including in seismic zones, with no load-bearing function. Their layer configurations are complemented by layers of insulating material (synthetic or mineral fiber) in a cavity or as external insulation ("cappotto"). ALVEOLATER® horizontal-hole clay blocks are "smooth" elements, produced in various sizes and thicknesses. Available thicknesses range from 10 to 35 cm.

Специфікація

Muratura in blocchi di laterizio alleggerito forato, tipo Alveolater® 60 marcati CE in cat I S.A.C. 2+ secondo UNI EN 771-1. Classificazione dei blocchi secondo ex UNI 8942: forato per tamponamento UNI BF 00- Classification of blocks according to standard UNI EN 771-1: LD Block dimensions: cm ……x cm …… and height of cm …… Dimensional tolerance ……… (T1, T2, Tm according to UNI EN 771-1) Tolerance range ……… (R1, R2, Rm according to UNI EN 771-1). Gross bulk density …………… kg/m³ Tolerance ……… (D1, D2, Dm according to UNI EN 771-1). Installation: horizontal holes with class M …… mortar Horizontal and vertical mortar joints. The blocks must have a hole percentage between 60 and 70%. The equivalent thermal conductivity of the block will be determined through the calculation set out in standard UNI EN 1745:2012, based on the conductivity value given in Table A1 of Appendix A of standard UNI EN 1745:2012 as a function of the bulk density of the raw material used, or on an experimental value obtained on the clays used at the production plant, according to the methods and testing frequency established by the aforementioned standard. All declared characteristics will be documented through the attestation required for CE marking purposes, indicating the Certification Body and the certificate number if manufactured under control system 2+. The U-value (thermal transmittance) must not exceed ……… W/m²K. The Sound Reduction Index Rw of the wall must be no lower than ……… dB, based on experimental testing or calculation. These performance characteristics may also be documented through a manufacturer's declaration, with specific reference to test reports and/or calculations.

Технічна специфікація

Унікальний номерALVEOLATER
ТипObject (single object)
Дата публікації2026-09-08
Номер видання1

Посилання

Url-адреса продуктуhttps://www.siailaterizi.it/prodotti/laterizi-alveolater-bio-classe-60
Технічний описhttps://siailaterizi.r1-it.storage.cloud.it/documentazione-tecnica/Quaderno_Tecnico_2024/06%20-%20SIAI_Alveolater%2060.pdf?time=638684701788381662

Пов'язані

Розроблено вItaly
Виготовлено вItaly

Класифікація

Категорія BIMobjectБудівельні матеріали - Цегла та блоки
Класифікація IFCWall
Номер OmniClass23-13 21 00
Заголовок OmniClassBlocks and Bricks

Доступність регіону

Європа
Åland Islands
Albania
Andorra
Austria
Belarus
Belgium
Bosnia and Herzegovina
Bulgaria
Croatia
Cyprus
Czech Republic
Denmark
Estonia
Faroe Islands
Finland
France
Germany
Gibraltar
Greece
Guernsey
Hungary
Iceland
Ireland
Isle of Man
Italy
Jersey
Latvia
Liechtenstein
Lithuania
Luxembourg
Malta
Moldova
Monaco
Montenegro
Netherlands
North Macedonia
Norway
Poland
Portugal
Romania
Russia
San Marino
Serbia
Slovakia
Slovenia
Spain
Svalbard and Jan Mayen
Sweden
Switzerland
Ukraine
United Kingdom
Vatican City