CTL BASE - Connector for wood floors

CONNECTOR COMPOSITION
A 12 mm headed stud.
A 4 mm thick 50x50 square pressed base plate with folded corners to create crampons. The stud connector and the base plate are cold riveted together.
Two 8 mm coach screws going through the two holes of the plate.
Galvanised steel screws with sharp Ø 8.0 mm tip, length 70, 100 and 120 mm. All the connector components are zinc plated with an average protection thickness of 8 μm, corresponding to 2 cycles of "Kesternich" corrosion resistance.