Tile Waterproofing Membrane - HS 100

Flexible acrylic polymer waterproofing membrane

UZIN HS 100 is a flexible, ready to use acrylic polymer based waterproofing membrane for tile and stone in interior & exterior non-submerged applications. Used as crack-isolation membrane UZIN HS 100 also reduces crack transmission in tile and stone floors

Специфікація

Applications
- Over properly prepared concrete, masonry, cement mortar beds and leveling coats
- Over tile backerboards (with approved seam tape)
- Over gypsum wallboard (interior, dry conditions)
- Over industry standard plywood (interior, dry conditions)
- Over radiant heated substrates
- Over UZIN brand surface preparation products where applicable
- With UZIN WP Accessories for a complete waterproofing system. See UZIN WP Accessories PDS for items and additional installation detail
- For floor, wall and ceiling applications in residential, commercial and institutional conditions
- Suitable applications include showers, tub surrounds, bathrooms, laundry, food service, exterior walls and building facades, shower pans, staircases, staircase landings and wet rooms
- For use in steam rooms and steam showers providing there is an intact vapor barrier behind the backerboard. If unsure, use UZIN WP Hydrostop
- For contact with plumbing rated PVC, copper, brass and stainless steel pipe penetrations, lightly abrade the surface
- For overlapping contact with Schluter® Kerdi series products such as Kerdi Drain, Kerdi Curb, Kerdi Board and other Schluter® components
- For immersion applications such as pools, spas and fountains, use UZIN HS 200
- For preventing in-plane floor cracks from transmitting through tile or stone
- For filling gaps and changes in plane to floor and wall joints up to 1/8" (3 mm)
- For use in conjunction with breathable fiber reinforcing meshes
Properties
- Smooth texture and easy handling - Fast, seamless application with roller, trowel or brush
- Ready-mixed one-component - No mixing, use only what is necessary
- UPC Listed for Shower pan liner - Plumbing code performance validation
- No mesh required to meet ANSI A118.10 - Labor and cost savings, Surface uniformity
- Fast curing - Same day tile installation
- Rectangle pails - No paint tray required, just dip and go
- Light green color - Easy to see reference marks
- Non-sag, filling properties - Use as a gap filler up to 1/8” (3mm)