6180 Series Effluent or Dewatering Submersible Pumps

Application- Commercial Buildings

0.5 or 1 HP Effluent or dewatering submersible pumps, 1.5”, 2” or 3” NPT vertical discharge

Features and Benefits

• Durable, epoxy coated cast iron construction
• Motor : 1 Ph or 3 Ph, oil-filled, hermetically-sealed, automatic reset, thermal overload protected (1 Ph)
• Bearings – Upper and lower ball bearings
• Stainless steel motor shaft
• Dual mechanical shaft seals – upper carbon/ceramic, lower silicon carbide/carbon. Optional seal materials available
• Viton O-ring seals and cover gasket
• Impeller – non-clogging, cast iron vortex design passes 3/4″ (19 mm) spherical solids
• 25′ (8 m), UL listed, 3-wire neoprene cord and plug. Longer cords available in lengths of 35′ – 50′ (11 m – 15 m)
• No screens to clog
• Stainless steel screws, bolts and handle
• 1-1/2″ NPT discharge with 2″ or 3″ flange available
• Corrosion-resistant, powder coated epoxy finish
• Moisture sensors available for early warning of seal failure (optional)
• 100% computerized tested