發佈您的產品
Master-Fit® BTR Commercial Gas Water Heater, Up to 80% Efficient, 65/71/81/85/100 gal Capacity
Master-Fit® BTR Commercial Gas Water Heater, Up to 80% Efficient, 65/71/81/85/100 gal Capacity

    Master-Fit® BTR Commercial Gas Water Heater, Up to 80% Efficient, 65/71/81/85/100 gal Capacity

    The Master-Fit® BTR series with automatic flue damper provides outstanding performance and maximum installation flexibility for both new construction and replacement applications. Multiple options for placement of water connections and low installation clearances are additional installer-friendly features.
    • Effikal automatic flue damper minimizes standby heat loss to achieve 80% thermal efficiency
    • Inlet/outlet connections located top, front and rear for greater installation flexibility
    • Space-saving units are up to one foot shorter than models they replace
    • Installs standalone, manifolded or connected to storage tanks
    規格
    • (Natural or Propane) gas water heater(s) shall be A. O. Smith Master-Fit® model # _____________ or equal, with a storage capacity of __________ gallons, an input rating of ___________________ BTUs per hour, a recovery rating of_________ gallons per hour (gph) at 100ºF rise and a maximum hydrostatic working pressure of 160 psi. Water heater(s) shall be protected against overheating caused by the buildup of scale, film and other sediment by a self-cleaning device, positioned inside the tank so that it directs the flow of inlet water to keep precipitated solids in suspension so that they are removed from the water heater on that or successive draws. Glasslined water heater(s) shall also be protected against electrolytic corrosion by multiple factory-installed anode rods. In addition, water heater(s) shall: 1) Be equipped with an integrated control system consisting of a 180ºF adjustable thermostat with upper and lower sensing bulbs. 2) Be equipped with intermittent electronic ignition, a manual reset gas shutoff device, a gas pressure regulator, factory-installed, CSA Certified and ASME Rated T&P relief valve and 2-3/4˝ x 3-3/4˝ tank inspection port. 3) Be design-certified by UL (Underwriters Laboratories) to current edition of ANSI Z.21.10.3 - CSA 4.3 standards governing storage-type water heaters. 4) Meets the thermal efficiency and standby loss requirements of the U. S. Department of Energy and Current Edition of ASHRAE/ IESNA 90.1. 5) Have a 3-year limited warranty against corrosion as outlined in the written warranty.
    技術規格
    • 唯一參考aosmith-btr
    • 產品系列Storage Water Heaters
    • 產品組合Master-Fit
    • 類型对象(单个对象)
    • 發佈日期2017-10-16
    • 版本號1
    相關
    • 主材料钢
    • 設計國家/地區美國
    • 製造國家/地區美國
    分類
    • BIMobject 類別管道 - 热水器
    • Uniclass 2015 代碼Pr_60_60_96_34
    • Uniclass 2015 說明Gas-fired storage water heaters
    • CSI MasterFormat 2014 代碼22 34 36
    • CSI MasterFormat 2014 標題Commercial Gas Domestic Water Heaters
    • OmniClass 編號23-31 29 13 13
    • OmniClass 標題Hot Water Tank Gas Heaters

    發售地區

    北美
    伯利茲
    加拿大
    千里達和多巴哥
    危地馬拉
    古巴
    哥斯達黎加
    多米尼克
    多米尼加共和國
    安圭拉
    安提瓜和巴布達
    尼加拉瓜
    巴哈馬
    巴巴多斯
    巴拿馬
    庫拉索
    格林納達
    格陵蘭島
    法屬聖馬丁
    波多黎各
    洪都拉斯
    海地
    牙買加
    特克斯和凱科斯群島
    瓜德羅普
    百慕達
    美國
    美屬維爾京群島
    聖基茨和尼維斯
    聖巴泰勒米
    聖文森與格瑞那丁
    聖皮埃爾和密克隆群島
    聖盧西亞
    英屬維爾京群島
    荷屬聖馬丁
    荷蘭加勒比區
    蒙塞拉特島
    薩爾瓦多
    開曼群島
    阿魯巴
    馬提尼克
    墨西哥