Cyclone® XL 750,000 -1,000,000 BTU/H High Efficiency, Condensing Water Heaters with Modulating Burner

SPECIFICATION

(Natural or Propane) gas water heater(s) shall be A. O. Smith Cyclone XL model # _________ or equal, minimum 97% thermal efficiency, a storage capacity of 120 gallons, an input rating of __________ BTUs per hour, a recovery rating of ___________ gallons per hour (gph) at 100°F rise and a maximum hydrostatic working pressure of 160 psi. Water heater(s) shall: 1. Modulating gas burner that automatically adjusts the input based on demand. 2. Powered anodes that are non sacrificial and maintenance free. 3. Have seamless glass-lined steel tank construction, with glass lining applied to all water-side surfaces after the tank has been assembled and welded; 4. Meets the thermal efficiency and/or standby loss requirements of the U. S. Department of Energy and current edition of ASHRAE/ IES 90.1; 5. Have foam insulation and a CSA Certified and ASME rated T&P relief valve; 6. Have a down-fired power burner designed for precise mixing of air and gas for optimum efficiency, requiring no special calibration on start-up; 7. Be approved for 0˝ clearance to combustibles.
The control shall be an integrated solid-state temperature and ignition control device with integral diagnostics, graphic user interface, fault history display, and shall have digital temperature readout. No charge connectivety shall be provided allowing for remote viewing and fault notificaion via app. 1. All models are design certified by Underwriters Laboratories (UL), Inc., according to ANSI Z21.10.3 - CSA 4.3 standards governing storage type water heaters; 2. Meet the
thermal efficiency and standby loss requirements of the U. S. Department of Energy and current edition ASHRAE/IES 90.1. Complies with SCAQMD Rule 1146.2 and other air quality management districts with similar requirements for low NOx emissions.
750,000 - 1,000,000 BTU Input: For Standard Power Venting: Water heater(s) shall be suitable for standard power venting using a 6”diameter PVC pipe for a total distance of 100 ft. equivalent feet of vent piping. For Power Direct Venting: Water heater(s) shall be suitable for power direct venting using a 6”diameter PVC pipe for a total distance of 100 ft. equivalent feet of vent piping and 100 ft. equivalent feet of intake air piping.
Operation of the water heater(s) in a closed system where thermal expansion has not been compensated for (with a properly sized thermal expansion tank) will
void the warranty.