ARDEX RG 12 1-6 - Heavy-duty, chemical-resistant epoxy grout

Heavy-duty, chemical-resistant epoxy grout with a fine and smooth joint surface.

ARDEX RG 12 1 - 6 The perfect solution. Do you know that too? Despite intensive and regular cleaning in the bathroom and kitchen, the joints there look scruffy after only a short time. This is mostly due to the cleaners that are used. They usually contain citric or acetic acid. Although this makes them excellent lime solvers, they unfortunately not only remove limescale from the ceramics and fittings, but also attack the hardened cement from the joint. The acidity of the cleaner can lead to color fluctuations (laxity), lime efflorescence and ugly holes. ARDEX now has the perfect solution for you, because ARDEX RG 12 is the ideal product for these areas. Thanks to the new epoxy wiper, which is guaranteed to be resistant to household cleaners of all kinds, you will receive long-lasting, beautiful joints in your bathroom. Kitchen and other heavily used living areas. ARDEX RG 12 also convinces with good processing properties, is easy to insert and wash. ARDEX RG 12 1-6 meets the requirements of RG according to EN 13888 and is very low in emissions - EC 1 PLUS R - according to GEV EMICODE.

Product Highlights:

Heavy duty and chemical resistant
For joint widths of 1-6 mm
Long processing time of 45 minutes
Easy to insert and wash
Fine and very smooth joint surface

规格

Mixing ratio
is specified by containers
fresh weight
approx. 1.70 kg / l
Processing time at + 20 ° C
approx. 45 min
Working time
approx. 30 min (measured on fresh mortar)
packing
Bucket of 4 kg
3.2 kg resin paste + insert can with 0.8 kg hardener
Cans with 1 kg
0.8 kg resin paste + insert can with 0.2 kg hardener
storage
Can be stored in dry rooms for approx. 12 months in the original sealed container.
Store bucket vertically, do not tilt! Stiffening the resin component during storage is of no importance to the quality of ARDEX RG 12 1-6.
Accessibility at + 20 ° C
after approx. 12 h
flexural strength
after 1 days approx. 30.00 N / mm²
after 28 days approx. 33.00 N / mm²
material requirements
approx. 1.30 kg / m² powder with toothing 3 x 3 x 3 mm
approx. 2.50 kg / m² powder with toothing 6 x 6 x 6 mm
approx. 3.10 kg / m² powder with toothing 8 x 8 x 8 mm
For gluing on smooth surfaces
Correction time
approx. 30 min
Bond strength
After 28 days of dry storage> 2.5 N / mm²
material requirements
For joint width 2.00 mm , joint depth 3.00 mm
for tiles
from 2 x 2 cm approx. 1.00 kg / m²
For joint width 3.00 mm , joint depth 5.00 mm
for tiles
of 5 x 5 cm approx. 1.00 kg / m²
For joint width 2.00 mm , joint depth 4.00 mm
for tiles
of 15 x 15 cm approx. 0.18 kg / m²
For joint width 2.00 mm , joint depth 7.00 mm
for tiles
from 60 x 30 cm approx. 0.12 kg / m²
The additional losses due to excess material on the tiles amount to between 0.10 and 0.20 kg / m² , depending on their surface condition and method of operation .
Compressive strength
after 1 days about 55.00 N / mm²
after 28 days about 70.00 N / mm²
colour
White
silver gray
Gray
basalt
anthracite
sandgrey
dun
bali brown
bahamabeige