ARDEX EP 25 Epoxy Screed

Product description
Solvent- and water-free two-component epoxy resin system
For the production of fast-usable epoxy resin screeds on insulating layer, on separating layer and in combination in new buildings, old buildings and renovations
Ready for occupancy after 1 day
Low screed thicknesses possible
High compressive and bending tensile strengths
Easy processing
pumpable

Application
Mixed with ARDEX SPS special sand for the production of epoxy resin screeds in composite, on separating layer and on insulating layer.
In new buildings and especially in old buildings, renovations and renovations, eg on old wooden floorboards, and for the repair of old screeds of cement and calcium sulphate.
ARDEX EP 25 epoxy resin screeds can be walked on after just 12 hours and can be laid after 24 hours. For the execution of screeds the general guidelines and standards, DIN 18560 and DIN 18353 apply, unless otherwise stated in this data sheet.
For the interior.

规格

Ready to use : after approx. 24 hours.
Mixing ratio : approx. 1: 7,7 parts by weight (ARDEX EP 25: Sand)
Compressive strength : After 7d / + 23 ° C
approx. 35 N / mm²
Storage : Store in dry rooms for approx. 12 months in the original sealed container.
Store bucket vertically; do not tip!
Packing : bucket with lid unit.
Total content 13.1 kg or 3.2 kg net
Fresh weight of the mortar : Approx. 1.8 kg / l
Material requirements: Approx. 2.1 kg ARDEX EP 25 and 16 kg ARDEX SPS special sand per m² / cm layer thickness
Processing time (+ 20 ° C) : Approx. 60 minutes
walkability (+ 20 ° C) : after approx. 12 hours
bending tensile strength : after 7 d / 23 ° C
approx. 11.5 N / mm²