ARDEX FEATHER FINISH® ​​Self-Drying, Cement-Based Finish Underlayment

ARDEX FEATHER FINISH mixes to a creamy, smooth finish underlayment that eliminates flooring installation problems associated with disbonding, crumbling, mold, mildew and staining. ARDEX FEATHER FINISH may be used as an embossing filler when mixed with ARDEX P 82™ Ultra Prime.

Install over: concrete, masonry, wood, terrazzo, and ceramic and quarry tile - as well as properly prepared residues of cutback and other non-water-soluble adhesives on concrete - all without the need for priming or the use of a latex additive.

• Blend of hydraulic and other cements
• Self-drying matrix
• Mixes with water only
• Trowelable
• Mold and mildew resistant
• Interior use

• General priming recommendations:
• Porous surfaces: No priming required
• Most non-porous surfaces (epoxy coating systems, metal and concrete treated with silicate compounds) must be primed with ARDEX P 82™ Ultra Prime
• Gypsum underlayment - Use ARDEX P 51^TM Primer 
• Packaging: 10 lb. (4.5 kg)
• Coverage: Up to 300 sq. ft. per bag (27.9 m2)
• Thickness:
• True featheredge
• 1/2 in. (13 mm) over large areas
• Any depth in small areas
• Pot life: 20 minutes (may be retempered)
• Install floor coverings: 15 minutes

• VOC: 0