Pavimentazione architettonica in ghiaietto lavato Floortech-Prerit

Complete system for the construction of architectural flooring in washed gravel (deactivated concrete) with high performance and durability.

• READYMESH PM-180
• PRERIT COMPOUND
• PRERIT SOLUTION
• QL NANO LITHIUM SALT RESISTANT
• PROTECH SIGILFLEX MONO

READYMESH PM-180

READYMESH PM-180 is an auxiliary, multi-filament polypropylene micro-fibre, with CE marking, 18 mm long, suitable for the addition to cement conglomerates in general. The addition of READYMESH PM-180 to the mix counters the cracking phenomenon due to plastic shrinkage of the concrete, as well as having positive effects on the durability of the mix, resistance to frost/defrosting and resistance to knocks and overall impermeability.

PRERIT COMPOUND

Additive power mix for enhanced performance of the functional characteristics of the concrete used to create architectural floors of landscaping/environmental worth, with a "washed gravel or visible gravel" technique.

PRERIT SOLUTION

Set retarder in aqueous solution to be applied, using a low pressure airless pump, on fresh concrete surfaces, to allow removal by washing with water, a cortical layer a few millimetres thick, and then expose the aggregate forming the concrete. Specific for the realisation of floors with landscape/environmental value with the "washed gravel" technique.

QL NANO LITHIUM SALT RESISTANT

Hardener, sealant and thickener QL NANO LITHIUM SALT RESISTANT is a protective treatment against salts and powder that is transparent, odourless and complies from a VOC point of view, with a water base and safe for the environment. It can harden, seal and thicken surfaces in masonry work and concrete. Thanks to its chemical reaction with the silica materials, QL NANO LITHIUM SALT RESISTANT creates a permanent water repellent layer that protects and preserves the concrete surface and various types of masonry substrates without altering the appearance and natural consistency.

PROTECH SIGILFLEX MONO

Mono-component sealant based on hygrohardening aromatic polyurethane resins. After cross-linking it leads to the formation of an elastic and tenacious film with very good chemical resistance to water, oil and hydrocarbons, aviation gasolines. It adheres to different media: concrete, ceramic, steel sheets, wood, synthetic media, glass, and copper. It can be painted using suitable products (like SYNTECH POLYUREA TOP COATING).