InsulBase Polyiso Insulation

InsulBase is a rigid-roof insulation panel composed of a closed-cell polyisocyanurate foam core bonded on each side to glass-reinforced felt (GRF). ReadyFlash® Technology is a standard feature of InsulBase Polyiso that allows the contractor to manipulate flash-off times by choosing which side of the insulation board to apply membrane adhesives. ReadyFlash features a dark glass-reinforced felt (GRF) on one side of the insulation board and a light glass-reinforced felt on the other.

Increases surface temperature of the dark facer up to 25ºF above ambient temperature and provides up to 30% faster adhesive flash-off.
Decreases surface temperature of the light facer up to 5ºF below ambient temperature.

Features and Benefits

InsulBase polyiso insulation provides the highest R-value per inch of commercially available insulation products
Zero ozone-depleting components, HFC- and HCFC-free formulation
Approved for direct application to steel decks

規格

Panel Characteristics
- Available in 4' x 4' (1220 mm x 1220 mm) and 4' x 8' (1220 mm x 2440 mm) panels in thickness of ½" (13 mm) to 4.5" (115 mm)
- Available in 4' x 12' (1220 mm x 3660 mm) panels in the following thickness: 1.5", 1.75", 2.0", 2.2", 2.5", 2.6", 3.0", 3.3", and 3.5"Applications
- Single-Ply Roof Systems (Ballasted, Mechanically Attached, Fully Adhered)
Codes and Compliances
- ASTM C1289, Type II, Class 1, Grade 2 (20 psi), Grade 3 (25 psi)
- International Building Code (IBC) Section 2603»UL Standard 790, 263 and 1256: Component of Class A Roof Systems (refer to UL Roof Materials’ system directory)
- FM Standards 4450/4470: Class 1 approval for steel roof-deck constructions (refer to FM RoofNavSM)»California Code of Regulations, Title 24, Insulation Quality Standard License #TI-1418
- Third-party certification with the PIMA Quality Mark for Long-Term Thermal Resistance (LTTR) values
- CAN/ULC S704, Type 2, Class 3 (20PSI), Type 3, Class 3 (25PSI)
- Florida Building Code Approval»CDPH compliant for maximum allowable concentrations of target VOCs
Carlisle SynTec Systems’ focus has always been innovation – Innovation to solve problems, improve performance, reduce labor, and above all, improve sustainability. Carlisle is committed to driving sustainable and efficient processes in the design and manufacturing of our products.
- Zero ozone-depleting components, HFC- and HCFC-free formulation»CDPH Compliant for maximum allowable concentrations of target VOCs
- Up to 56.9% recycled content by weight (36.6% post-consumer/20.3% pre-consumer)
- Contributes to LEED® and Green Globes certification requirements
- End-of-life jobsite disposal options available for re-use/re-purposing
- Carlisle Polyiso Roof Insulation and HD Cover Board EPDs available
- PIMA Quality MarkCM Certification Program participant for Long-Term Thermal R-values (LTTR)»Highest R-value per inch providing maximum energy savings and CO2emissions avoidance
Polyiso Eco Ready (Optional)
- 5% bio-content option available (for 2.0" and 2.6" thicknesses)
- Contributes to carbon reduction initiatives via mass balance approach under ISCC PLUS compliance

技術規格

唯一參考insulbase-polyiso-insulation
產品系列Roofing-Products
產品組合Insulation
類型对象（单个对象）
發佈日期2026-08-27
版本號1

連結

相關

主材料聚异氰脲酸酯PIR

分類

BIMobject 類別建筑材料 - 隔离
IFC 分類屋顶
ETIM 代碼EC000406
ETIM 名稱Thermal insulation
Uniclass 2015 代碼Pr_25_31_28_65
Uniclass 2015 說明Polyisocyanurate (PIR) foam insulation
CSI MasterFormat 2014 代碼07 21 13.13
CSI MasterFormat 2014 標題Foam Board Insulation
OmniClass 編號23-13 25 19 11
OmniClass 標題Slab and Board Thermal Insulation

發售地區

北美
伯利茲
加拿大
千里達和多巴哥
危地馬拉
古巴
哥斯達黎加
多米尼克
多米尼加共和國
安圭拉
安提瓜和巴布達
尼加拉瓜
巴哈馬
巴巴多斯
巴拿馬
庫拉索
格林納達
格陵蘭島
法屬聖馬丁
波多黎各
洪都拉斯
海地
牙買加
特克斯和凱科斯群島
瓜德羅普
百慕達
美國
美屬維爾京群島
聖基茨和尼維斯
聖巴泰勒米
聖文森與格瑞那丁
聖皮埃爾和密克隆群島
聖盧西亞
英屬維爾京群島
荷屬聖馬丁
荷蘭加勒比區
蒙塞拉特島
薩爾瓦多
開曼群島
阿魯巴
馬提尼克
墨西哥