Screenogril - Fencing system

Standard: BS1722-14:2017, BS EN ISO 1461:2009, BS EN 13438:2013

Product Reference: CLD Screenogril Louvred Rigid Panel System

Panel type: Louvre panels consisting of triple flanged louvres, electrofused to 4mm horizontal wires at 46mm vertically and 132mm horizontally. Top and bottom flat bars 50mm x 3mm. Galvanised and polyester powder-coated to a minimum of 60 microns.

2 vision options available – select as required:

80/20 vision using 50mm x 1.5mm fin louvres

100/0 vision using 69mm x 1.5mm fin louvres

Panel width: 1992mm

Wire diameter: 4mm

Mesh size: n/a

Height: 80/20 vision: 954mm/1596mm/1963mm or any combination of these heights

100/0 vision: 967mm/1608mm/1975mm or any combination of these heights

Nominal height: 1.0, 1.4m, 1.6m, 2.0m – panels can be modified to bespoke heights if required.

Finish: Polyester powder-coated to minimum 60 microns.

Any RAL colour

Top edge projection: nil - flush

Panel installation: Bottom of panel maximum of 100mm above ground

Security topping n/a

Posts: RHS or SHS, depending on application – please contact CLD Fencing Systems for full details - galvanised after manufacture and polyester powder-coated to match fencing

Post dimensions: Depending upon application

Maximum post Varies dependant on post section

Centres:

Fixings: Depending on application – please contact CLD Fencing Systems for full details.

Foundations: Set posts in holes 300mm diameter x 800mm deep (adjust according to fence height), filled not less than half the depth with concrete. Note: contractor/ client is responsible for the foundation size suitable for the ground conditions

Warranty: Minimum of 15 years against manufacturing defects.

Notes: All dimensions are nominal, for further information please contact CLD Fencing Systems.

Information is correct at time of production. As part of our policy of continuous improvement, we reserve the right to alter product specification without notice.

To be read in conjunction with Preliminaries/General conditions