發佈您的產品
Half-height Sensor Barrier Argus HSB-E08
Half-height Sensor Barrier Argus HSB-E08
Half-height Sensor Barrier Argus HSB-E08
Half-height Sensor Barrier Argus HSB-E08
Half-height Sensor Barrier Argus HSB-E08
Half-height Sensor Barrier Argus HSB-E08
    dormakaba

    Half-height Sensor Barrier Argus HSB-E08

    • Passage width = 650 mm, total width = 1.050 mm, interlock height 1.600 mm, interlock length = 2.050 mm
    • Two door leaves made of transparent polycarbonate, upper edge 1.600 mm.
    • Housing made of stainless steel satin finish AISI 304. base closed AISI 304.
    • Stainless steel satin finish.
    • Function Type 2 power assisted motion; 2 servo positioning drives / 2 directions electrically controlled, drives integrated in the rotating tube.
    • Entrance sector monitored by enhanced sensor system in optimised overall length and alignment (increased level of single passage monitoring in both directions, security level 2). 
    • Integrated protection against entry from below, identification of trolleys, detection of children. Protective device: rotation angle of the door leaves is monitored by the same sensor system.
    • 2 operation modes are possible: 
      • Default position "night-operation" closed: the door leaves open automatically for authorised persons in the passage direction and then close again after passage. 
      • Default position "day-operation" open: the door leaves close automatically if somebody tries to pass without authorisation.
    • In the case of a power failure: door leaves can be moved freely!
    • Control units and power supply unit are integrated in the unit.
    • Power supply 100-120 V / 200-240 V 50-60 Hz
    • Dowelled on finished floor level FFL.
    • Not suitable for outdoor installation!
    • Prot. class Housing IP43 components conducting supply voltage IP43.
    技術規格
    • 唯一參考Argus_HSB-E08
    • 產品系列Entrance
    • 產品組合Special Doors
    • 類型对象(单个对象)
    • 發佈日期2020-01-30
    • 版本號1
    • 高度 (mm)945
    • 寬度 (mm)1070
    • 深度 (mm)2010
    相關
    • 主材料玻璃
    • 次要材料聚碳酸酯
    • 設計國家/地區德國
    • 製造國家/地區德國
    分類
    • BIMobject 類別门 - 安全
    • IFC 分類门

    發售地區

    欧洲 亚洲 非洲 南美洲 大洋洲
    丹麥
    不丹
    中非共和國
    厄瓜多爾
    北馬里亞納群島
    俄羅斯
    中國
    乍得
    哥倫比亞
    圖瓦盧
    保加利亞
    也門
    佛得角
    圭亞那
    基里巴斯
    克羅地亞
    亞美尼亞
    利比亞
    委內瑞拉
    密克羅尼西亞聯邦
    冰島
    以色列
    利比里亞
    巴拉圭
    巴布亞新畿內亞
    列支敦士登
    伊拉克
    剛果
    巴西
    帛琉
    匈牙利
    伊朗
    剛果民主共和國
    智利
    庫克群島
    北馬其頓
    北韓
    加納
    法屬圭亞那
    所羅門群島
    塞浦路斯
    南韓
    加蓬
    烏拉圭
    托克勞
    塞爾維亞
    卡塔爾
    南蘇丹
    玻利維亞
    斐濟
    奧地利
    印尼
    南非
    福克蘭群島(即馬爾維納斯群島)
    新喀里多尼亞
    奧蘭
    印度
    博茨瓦納
    秘魯
    新西蘭
    安道爾
    台灣
    厄立特里亞
    蘇里南
    東帝汶
    希臘
    吉爾吉斯斯坦
    吉布提
    阿根廷
    法屬波利尼西亞
    德國
    哈薩克斯坦
    喀麥隆
    湯加
    意大利
    土庫曼斯坦
    坦桑尼亞
    澳洲
    愛沙尼亞
    土耳其
    埃及
    瑙魯
    愛爾蘭
    塔吉克斯坦
    埃塞俄比亞
    瓦利斯和富圖納群島
    拉脫維亞
    孟加拉國
    塞內加爾
    瓦努阿圖
    挪威
    尼泊爾
    塞拉利昂
    皮特凱恩群島
    捷克共和國
    巴勒斯坦
    塞舌爾
    紐埃
    摩爾多瓦
    巴基斯坦
    多哥
    美國本土外小島嶼
    摩納哥
    巴林
    安哥拉
    美屬薩摩亞
    斯洛伐克
    敘利亞
    尼日利亞
    薩摩亞
    斯洛文尼亞
    斯里蘭卡
    尼日爾
    諾福克島
    斯瓦爾巴特群島
    新加坡
    岡比亞
    關島
    根息
    日本
    布基納法索
    馬紹爾群島
    梵蒂岡
    柬埔寨
    布隆迪
    比利時
    格魯吉亞
    幾內亞
    法國
    汶萊
    幾內亞比索
    法羅群島
    沙地阿拉伯
    摩洛哥
    波斯尼亞 黑塞哥維那
    泰國
    斯威士蘭
    波蘭
    澳門
    毛里塔尼亞
    澤西島
    烏茲別克斯坦
    毛里裘斯
    烏克蘭
    科威特
    津巴布韋
    瑞典
    科科斯(基林)群島
    烏干達
    瑞士
    約旦
    留尼汪
    白俄羅斯
    緬甸
    盧旺達
    盧森堡
    老撾
    科摩羅
    直布羅陀
    聖誕島
    科特迪瓦
    立陶宛
    英屬印度洋領地
    突尼斯
    羅馬尼亞
    菲律賓
    納米比亞
    聖馬力諾
    蒙古
    索馬里
    芬蘭
    越南
    聖多美和普林西比
    英國
    阿塞拜疆
    聖赫勒拿島
    荷蘭
    阿富汗
    肯尼亞
    葡萄牙
    阿拉伯聯合酋長國
    莫桑比克
    西班牙
    阿曼
    萊索托
    阿爾巴尼亞
    香港
    蘇丹
    馬恩島
    馬來西亞
    西撒哈拉
    馬耳他
    馬爾代夫
    貝寧
    黑山
    黎巴嫩
    贊比亞
    赤道幾內亞
    阿爾及利亞
    馬拉維
    馬約特
    馬達加斯加島
    馬里