GENIALE SEISMIC COAT 10+4CSE21

The Geniale Ecosism® Seismic Coat is an innovative technological solution that, through a combined intervention that maximizes the benefit / cost ratio, allows both seismic safety and energy efficiency of existing buildings according to current regulations. As indicated by the name itself, the Geniale Seismic Coat, applied to the outside of the building to provide it with a new seismic-resistant "skin", is made up of a thin slab of reinforced concrete cast in place inside two layers of material customizable insulation. The casting, suitably sized at the design stage, is made integral with the existing structure by inserting appropriate anchors which, arranged at the level of the foundations and the floor curbs, guarantee maximum collaboration between the new system and the structure itself. Thanks to the use of the galvanized steel mesh characteristic of Ecosism®, the system is supplied with the pre-assembled insulation and with guides for the correct installation of the already prepared structural reinforcements, thus allowing to minimize operations and scraps of construction site. Furthermore, to improve the bending behavior of the sheet and reduce the risk of instability outside the plane, it is possible to provide for the creation of appropriate horizontal and vertical reinforcement ribs. Finally, thanks to the particular conformation of the galvanized steel wire mesh, it is possible to create a particularly solid traditional plaster finish layer that guarantees maximum protection of the insulating material against impacts and weather events. The Geniale seismic coat is produced to measure on the basis of the architectural survey in situ and according to the structural project developed by the technician in charge. The panels of the Seismic Coat, produced with a height equal to that of the floor of the structure, faithfully follow the elevations of the building (preparation of the forometries during the production phase) and can be customized by using different types of insulating material. The Seismic Coat can be designed for different levels of increase in seismic and energy performance, depending on both the thickness and the materials used. To this end, by adopting specific products such as rock wool, it is possible to guarantee both an improvement in energy performance and an increase in the acoustic insulation and fire resistance of the building. The patent, validated by cyclical tests on full-scale samples, was conceived and developed in collaboration with the University of Padua (ICEA Department).

規格

ADVANTAGES EFFICIENCY: the Seismic Coat allows to achieve two results simultaneously, reducing the processing phases and, consequently, the realization times MINIMUM INVASIVITY: The Seismic Coat is made only on the external surface of the building, ensuring its continuity of use even during application, unlike most of the seismic improvement / adaptation systems on the market today. OPTIMIZATION: The Seismic Coat does not require formwork, since the layers of insulation also have the function of containing the cast of structural concrete created on site. ECONOMICITY AND GUARANTEE: by proposing a unique solution for improving the energy and seismic performance of the building, you have the possibility of entrusting the work to a single company, it does not have to be carried out at a later date and allows you to keep the construction costs down and have the guarantee of the result. PRECISION: The Ecosism® metal mesh allows to ensure the correct positioning of the reinforcement bars within the concrete layer. In this way, even if the thickness is reduced, an adequate concrete cover can be guaranteed. CUSTOMIZATION: Possibility of customer choice of a customized insulation package both as regards insulation materials and thickness, according to requirements. FINISHING: Thanks to the particular conformation of the metal mesh, it is possible to create a finish with reinforced, solid and impact-resistant plaster that will protect the insulation for the entire useful life of the structure. QUICKNESS: The Seismic Coat is produced in the factory in large modules, in this way speed and precision of installation are increased and waste and scraps are eliminated. BREATHABILITY: The cracks between the slices of insulation created by the presence of the metal mesh guarantee the breathability of the wall and do not affect energy performance (certified by testing in a hot chamber).

技術規格

唯一參考10_4CSE21
產品系列IFC INSULATED CONCRETE FORMS
產品組合CAPPOTTO SISMICO
類型对象（单个对象）
發佈日期2020-03-12
版本號1

連結

產品網址http://www.ecosism.com/moduli/geniale/
安裝說明https://www.ecosism.com/download-cataloghi/
教學影片https://www.youtube.com/embed/NHUpQUzoY3M?rel=0&controls=1&showinfo=0;autoplay=2
技術說明https://www.ecosism.com/moduli/geniale/

相關

主材料EPS
設計國家/地區意大利
製造國家/地區意大利

分類

BIMobject 類別墙壁 - 外墙
IFC 分類墙壁
UNSPSC 名稱Structural components and basic shapes
UNSPSC 代碼3010
Uniclass 2015 代碼EF_25
Uniclass 2015 說明Wall and barrier elements
CSI MasterFormat 2014 代碼03 11 19
CSI MasterFormat 2014 標題Insulating Concrete Forming
OmniClass 編號23-13 31 17 17
OmniClass 標題Insulated Concrete Forms
CSI UniFormat II 代碼B2010
CSI UniFormat II 標題Exterior Walls

發售地區

欧洲
丹麥
保加利亞
克羅地亞
冰島
列支敦士登
匈牙利
北馬其頓
塞浦路斯
塞爾維亞
奧地利
奧蘭
安道爾
希臘
德國
意大利
愛沙尼亞
愛爾蘭
拉脫維亞
挪威
捷克共和國
摩爾多瓦
摩納哥
斯洛伐克
斯洛文尼亞
根息
梵蒂岡
比利時
法國
法羅群島
波斯尼亞黑塞哥維那
波蘭
澤西島
烏克蘭
瑞典
瑞士
白俄羅斯
盧森堡
直布羅陀
立陶宛
羅馬尼亞
聖馬力諾
芬蘭
英國
荷蘭
葡萄牙
西班牙
阿爾巴尼亞
馬恩島
馬耳他
黑山