發佈您的產品
Geofor - Overlapping prefabricated bed joint reinforcement
Geofor - Overlapping prefabricated bed joint reinforcement
Geofor - Overlapping prefabricated bed joint reinforcement
Geofor - Overlapping prefabricated bed joint reinforcement
    Geohidrol

    Geofor - Overlapping prefabricated bed joint reinforcement

    Overlapping prefabricated bed joint reinforcement consisting of two parallel longitudinal wires (that are) joined by a central wire. The central wire forms a truss structure and is welded (soldered) on (in) the same plane along the inner side of the longitudinal wires. It has an innovative design that enables the (performing of the) overlap between reinforcements without the need for any further manipulation, keeping the same nominal width of the reinforcement in the overlap area. The ends of the pieces have a specific geometric plug-shaped configuration which enables the 250mm overlap to be performed without the need to cut the wires. Also, the transverse wire is crushed in said area so that minimum mortar beds can be ensured. It also has spacers on the transverse wires which permit the control of the bed joint thickness. It also includes some devices, called SAO, placed at both ends of the pieces which permit visual verification, after the execution phase, that the amounts of wall reinforcement correspond to those of the design and that the overlap length complies with the regulations.
    規格
    • Bed joint reinforcement valid for cracking control in masonry walls (made) of coated bricks, facebricks, lighweight clay blocks, hollow concrete blocks and concrete bricks. This reinforcement also permits structural use to execute cavity wall façades, self-supporting façades and ventilated façades. It is essential for the execution of any masonry wall made with GHAS SYSTEM. This system permits continuous thermal insulation and is suitable for “passive hause”.
    技術規格
    • 唯一參考geofor
    • 產品系列Bed Joint Reinforcement
    • 產品組合Geofor
    • 類型对象(单个对象)
    • 發佈日期2017-05-08
    • 版本號1
    相關
    • 主材料钢
    • 設計國家/地區西班牙
    • 製造國家/地區西班牙
    分類
    • BIMobject 類別建筑材料 - 加固
    • IFC 分類钢筋网
    • UNSPSC 名稱Bricks
    • UNSPSC 代碼301316
    • Uniclass 2015 代碼Ss_25_13_50
    • Uniclass 2015 說明Masonry wall systems
    • CSI MasterFormat 2014 代碼04 05 19.26
    • CSI MasterFormat 2014 標題Masonry Reinforcing Bars
    • OmniClass 編號23-13 21 21 11
    • OmniClass 標題Masonry Reinforcing
    • CSI UniFormat II 代碼B2010
    • CSI UniFormat II 標題Exterior Walls

    發售地區

    欧洲
    丹麥
    俄羅斯
    保加利亞
    克羅地亞
    冰島
    列支敦士登
    匈牙利
    北馬其頓
    塞浦路斯
    塞爾維亞
    奧地利
    奧蘭
    安道爾
    希臘
    德國
    意大利
    愛沙尼亞
    愛爾蘭
    拉脫維亞
    挪威
    捷克共和國
    摩爾多瓦
    摩納哥
    斯洛伐克
    斯洛文尼亞
    斯瓦爾巴特群島
    根息
    梵蒂岡
    比利時
    法國
    法羅群島
    波斯尼亞 黑塞哥維那
    波蘭
    澤西島
    烏克蘭
    瑞典
    瑞士
    白俄羅斯
    盧森堡
    直布羅陀
    立陶宛
    羅馬尼亞
    聖馬力諾
    芬蘭
    英國
    荷蘭
    葡萄牙
    西班牙
    阿爾巴尼亞
    馬恩島
    馬耳他
    黑山