GoBoard® Point Drain Kit

Approved Materials

Joint Sealing
GoBoard Pro Sealant (or approved alternative), or 2″ wide polymer-coated alkali-resistant fiberglass mesh tape and mortar, coated with a liquid waterproofing membrane.

Grout
Cement grout compliant with ANSI A118.16 standard, high-performance cement grout compliant with ANSI A118.7 standard, or epoxy grout compliant with ANSI A118.8 standard.

Tools

• pencil, or pen for marking
• straight edge
• measuring tape
• putty knife
• appropriate screw fastening device
• caulk gun

Limitations
When waterproof installations are required, all joints and fastener locations are sealed with GoBoard Pro Sealant or a sealant specified in the approved materials section. All joints must have at least 1/8″ gap filled with the sealant that also extends at least 1″ beyond either side of the joint

Safety
Wearing a respirator is recommended when working with GoBoard Pro Sealant in areas that are not well ventilated.  Please wear gloves, safety glasses, long sleeve shirts, and long pants and follow good safety practices when installing GoBoard. Temporary mechanical abrasion (itching) of skin, eyes, and respiratory tract may occur upon exposure to fibers or dust during handling.

Storage and Handling
GoBoard Point Drain Kit can be stored indefinitely in an enclosed shelter.