FRP reinforcement Kimitech CB system/CBA system

Kimia

FRP reinforcement Kimitech CB system/CBA system

Kimitech CB and CBA fabrics are used for structural consolidations of r.c., steel, wood and masonry elements. They are particularly suitable for plating inflected elements, to reinforce beams and partitions, to confine pillars and, in general, to circle buildings. Kimitech CB and CBA are family of carbon fiber reinforcement fabrics available in different weight and texture, specific for structural consolidation. Its advantages are: high mechanical resistance, low thickness and weight, speed and ease of installation, great workability and ductility, ability to orient and size the reinforcement of the structure as needed, good reversibility, excellent resistance to stray currents, solvents, acids.

規格

Repair, reinforcement, or seismic retrofitting of concrete and masonry structures using an FRP system equipped with a CVT. The process includes the following application steps: cleaning the substrate, completely removing any loose parts, rounding any edges, and filling any cracks with suitable mortars. Application on the treated surface of a primer based on two-component synthetic resin in water dispersion Kimicover FIX by Kimia S.p.A. or similar product. Apply a bonding layer of Kimitech CMP epoxy resin by Kimia S.p.A. or a similar product, using a brush or roller, directly onto the substrate. Apply Kimitech CB or Kimitech CBA carbon fiber fabric of the chosen weight and texture while still fresh. Impregnation is performed while still fresh with Kimitech CMP two-component, solvent-free epoxy resin by Kimia S.p.A. or a similar product, applied in several coats using a brush or roller. The bonding and impregnation resin must have the following characteristics: frost time: 25 minutes; complete cure at 25°C: 7 days; compressive strength after 7 days ASTM D695-02a: > 50 MPa; maximum tensile stress ASTM D 638: > 30 MPa; tensile modulus ASTM D 638: 1760 MPa. The product will be CE marked as a structural bonding product according to EN 1504-4. The strengthening system thus created will have a CVT and will fall within the identification classes according to the qualification procedures for strengthening systems created on site in point 5.2 of the “Guidelines for the identification, qualification and acceptance control of fiber-reinforced polymer matrix (FRP) composites to be used for the structural strengthening of existing buildings”. The supply and installation of all the materials described above and anything else needed to complete the work are included, excluding anchors which are calculated separately.

技術規格

唯一參考frp-kimitech-cb-cba
類型对象（单个对象）
發佈日期2026-04-13
版本號1

連結

產品網址https://www.kimia.it/en/pultruded-and-reinforcing-fabrics/kimitech-cb-320

相關

設計國家/地區意大利
製造國家/地區意大利

分類

BIMobject 類別建筑材料 - 加固

發售地區

欧洲
丹麥
俄羅斯
保加利亞
克羅地亞
冰島
列支敦士登
匈牙利
北馬其頓
塞浦路斯
塞爾維亞
奧地利
奧蘭
安道爾
希臘
德國
意大利
愛沙尼亞
愛爾蘭
拉脫維亞
挪威
捷克共和國
摩爾多瓦
摩納哥
斯洛伐克
斯洛文尼亞
斯瓦爾巴特群島
根息
梵蒂岡
比利時
法國
法羅群島
波斯尼亞黑塞哥維那
波蘭
澤西島
烏克蘭
瑞典
瑞士
白俄羅斯
盧森堡
直布羅陀
立陶宛
羅馬尼亞
聖馬力諾
芬蘭
英國
荷蘭
葡萄牙
西班牙
阿爾巴尼亞
馬恩島
馬耳他
黑山