BIG T FAST ie 80 EVO3
BIG T_FASTie 80 EVO3 is a floor-standing module for the instantaneous production of large amount of domestic hot water.
The function of the module is to heat the domestic hot water through the plate heat exchanger using the energy coming from a buffer tank.
The advantage of this module is the production of domestic hot water in large volume, with a low primary flow temperature of 48°C (DHW set at
45°C). This allows the use of several energy sources, such as solar installations, heat pumps, biomass, etc.
The module is designed with the most advanced hydraulic technologies and electronic control ensuring the production of DHW up to 220 l/min.
DOUBLE PUMPS. The adjustment of the flow rate on the primary side through two modulating pumps in parallel ensures a constant DHW supply
even in case of a pump fault (up to 60% of the total DHW supply) and guarantees the absolute precision of DHW outlet temperature control
even at minimum withdrawal of flow rates. The energy transferred to the cold water flow is only the energy necessary to produce the DHW at the
required temperature.
ENERGY EFFICIENCY. The module is energy efficient, reduces energy waste and preserves the energy stored inside the buffer tank. This system is
superior than all other traditional forms of DHW production (tank with coil or instantaneous gas/electricity producers).
LARGE WITHDRAWAL APPLICATIONS. The floor-standing module is suitable for large withdrawal applications such as block of flats, sports facilities
(changing rooms, gyms or swimming pools, football fields, etc.), residences, camping and holiday resorts, clinics, offices, cowsheds (drinking
troughs, processes for controlled average temperatures) and any other applications that requires large production of DHW.
REDUCES THE RISK OF LEGIONELLA. Its design significantly reduces water stagnation volumes and thanks to the anti-legionella function which
activates an external system to raise the temperature, the risk of bacterium proliferation is reduced to a minimum.
AVAILABLE CONFIGURATIONS.
The module is offered in 8 configurations with 3 sizes of hot water output to cover the different system requirements and conditions of use.
In addition to the basic version (DHW instantaneous production), the module can be set up with other accessories completely assembled and
tested directly inside the factory:
- RECIRCULATION MODULE (R) for the management of the recirculation when all the users must be kept warm
- MIXING MODULE (M) to adjust and stabilize the temperature on the primary side whenever the buffer tank temperature is higher than 58°C.
The M module facilitates the stratification into the buffer tank and limits the formation of limescale into the plate heat exchanger preserving
the system's functionality over the time;
- DIVERTING MODULE (D) to optimize buffer tank stratification;
- CASCADE KIT to connect several DHW production units in parallel (up to 1200 l/min) with primary temperature of 55°C;
- REMOTE DATA SUPERVISION SYSTEM.
發售地區
| 欧洲 | 亚洲 | 南美洲 | 大洋洲 | 非洲 |
|---|---|---|---|---|
丹麥 | 中國 | 巴西 | 新西蘭 | 南非 |
俄羅斯 | 亞美尼亞 | 烏拉圭 | 澳洲 | 摩洛哥 |
保加利亞 | 北韓 | 阿根廷 | 突尼斯 | |
克羅地亞 | 南韓 | 阿爾及利亞 | ||
冰島 | 吉爾吉斯斯坦 | |||
列支敦士登 | 哈薩克斯坦 | |||
匈牙利 | 土耳其 | |||
北馬其頓 | 巴林 | |||
塞浦路斯 | 格魯吉亞 | |||
塞爾維亞 | 沙地阿拉伯 | |||
奧地利 | 阿塞拜疆 | |||
奧蘭 | 阿拉伯聯合酋長國 | |||
安道爾 | 黎巴嫩 | |||
希臘 | ||||
德國 | ||||
意大利 | ||||
愛沙尼亞 | ||||
愛爾蘭 | ||||
拉脫維亞 | ||||
挪威 | ||||
捷克共和國 | ||||
摩爾多瓦 | ||||
摩納哥 | ||||
斯洛伐克 | ||||
斯洛文尼亞 | ||||
斯瓦爾巴特群島 | ||||
根息 | ||||
梵蒂岡 | ||||
比利時 | ||||
法國 | ||||
法羅群島 | ||||
波斯尼亞 黑塞哥維那 | ||||
波蘭 | ||||
澤西島 | ||||
烏克蘭 | ||||
瑞典 | ||||
瑞士 | ||||
白俄羅斯 | ||||
盧森堡 | ||||
直布羅陀 | ||||
立陶宛 | ||||
羅馬尼亞 | ||||
聖馬力諾 | ||||
芬蘭 | ||||
英國 | ||||
荷蘭 | ||||
葡萄牙 | ||||
西班牙 | ||||
阿爾巴尼亞 | ||||
馬恩島 | ||||
馬耳他 | ||||
黑山 |
類似產品
中文 (香港)
