發佈您的產品
Macuk E S-SR PRO
Lovato

Macuk E S-SR PRO

MACUK E S-SR PRO is an electronic Heat Interface Unit for heating and hot water applications. Thanks to the two plate heat exchanger the module also allows complete separation from the primary circuit or central plant system. Suitable for apartments, terraced houses, semi-detached house with centralized heating system.The production of domestic hot water is electronically controlled by a control unit and a brazed stainless steel plate heat exchanger that allows an immediate supply of DHW. Thanks to the modulating valve with 5-seconds stepper motor actuator (installed in the primary return circuit), which partializes the water flw in the primary circuit, water waste and unnecessary waiting times are eliminated. The primary water flw rate is also proportionally managed by the module: according to the demand of the sanitary user, the valve increases or decreases the opening of the primary return circuit. All the energy not used in the DHW circuit is used in the heating circuit.The module includes a built-in by-pass function, directly controlled by the electronics and the modulating valve and depends to the temperature set on the DHW sensor. During the stand-by phase, the DHW comfort function is activated, keeping the temperature of the exchanger at the set point value. If the temperature falls below the set temperature – hysteresis temperature (Tset-T hys) the two-way valve of the module is activated, taking heat from the primary circuit.The electronic control can also manage 2 temperature levels in the heating circuit: for underfloor heating ystems and for radiator/fan coil systems, both can be set by compensation curves.The pump will change the speed according to the ∆T value between flw and return. There is also a pressure transducer to protect the pump from damage caused by overpressures.
規格
  • Heat interface unit module consisting of: primary circuit with Cu Ø 18 mm pipes kit, 400 µ primary circuit strainer, sensor pocket for heat meter flow sensor, brazed AISI 316L heat exchanger for space heating circuit (separately supplied), 2-way valve DN20 Kv=4.5 regulated by means of 230V 3p electric servomotor, template for thermal energy meter L110 mm with M ¾" connections. 2-way modulating valve with linear stepper motor actuator 12V to regulate DHW production by partializing the water flow rate in the primary circuit, predisposition for brazed plate heat exchanger in AISI 316L on DHW side (supplied separately) sensor pocket for DHW circuit sensor and flow switch with calibration 1.5 ÷ 35 l/min, Cu piping kit Ø 18 mm. L110 mm jig with M ¾" connections for domestic cold water meter with 1,5 mc/h impulsive output (supplied separately). Heating circuit Cu pipe kit Ø 18 mm, thermowell for system flow probe, pressure transducer, high efficiency electronic circulator Wilo PARA 15/1-6 iPWM) and 3 bar safety valve. Mehta digital controller for electronic control of DHW production and complete management of the heating circuit. Manual air vent valves and system load tap included.
技術規格
  • 唯一參考Macuk-E-S-SR-PRO
  • 產品系列Macuk
  • 產品組合Pro
  • 發佈日期2021-01-21
  • 版本號1
相關
  • 設計國家/地區意大利
分類
  • BIMobject 類別暖通空调 - 暖通空调

發售地區

欧洲 亚洲 南美洲 大洋洲 非洲
丹麥
中國
巴西
新西蘭
南非
俄羅斯
亞美尼亞
烏拉圭
澳洲
摩洛哥
保加利亞
北韓
阿根廷
突尼斯
克羅地亞
南韓
阿爾及利亞
冰島
吉爾吉斯斯坦
列支敦士登
哈薩克斯坦
匈牙利
土耳其
北馬其頓
巴林
塞浦路斯
格魯吉亞
塞爾維亞
沙地阿拉伯
奧地利
阿塞拜疆
奧蘭
阿拉伯聯合酋長國
安道爾
黎巴嫩
希臘
德國
意大利
愛沙尼亞
愛爾蘭
拉脫維亞
挪威
捷克共和國
摩爾多瓦
摩納哥
斯洛伐克
斯洛文尼亞
斯瓦爾巴特群島
根息
梵蒂岡
比利時
法國
法羅群島
波斯尼亞 黑塞哥維那
波蘭
澤西島
烏克蘭
瑞典
瑞士
白俄羅斯
盧森堡
直布羅陀
立陶宛
羅馬尼亞
聖馬力諾
芬蘭
英國
荷蘭
葡萄牙
西班牙
阿爾巴尼亞
馬恩島
馬耳他
黑山