HomeWorks Universal DALI® Power Module (for regions outside of North America)

Power

• LQSE2-2DALUNV-D:

 –100 V~ 50/60 Hz 150 mA

 –120 V~ 50/60 Hz 120 mA

 –220-240 V~ 50/60 Hz 80 mA

 –277 V~ 50/60 Hz 70 mA

• Lightning strike protection meets ANSI/IEEE standard

62.31-1980. Can withstand voltage surges of up to

6000 V~ and current surges of up to 3000 A

• DALI® Bus Output: 16 V- 128 mA guaranteed supply

current, 250 mA maximum supply current per bus

Standards

• Lutron Quality Systems registered to ISO 9001:2015

• IEC 60669-2-5

• DALI-2® certified - IEC 62386-101 and IEC62386-103 ed.2

• NOM Certified

• ICES-3(B)/NMB-3(B)

• FCC Part 15

• cULus Listed

• UL® 924

Environment

• Ambient temperature operating range: 0 ºC to 40 ºC

(32 ºF to 104 ºF)

• Relative humidity: less than 90% non-condensing

• For indoor use only

Terminals

• Mains wiring: 1.0 mm2

to 4.0 mm2 (18 AWG to 12 AWG)

• DALI® bus wiring: 0.5 mm2

to 4.0 mm2

(20 AWG to 12 AWG)

• QS link wiring: 0.5 mm2

to 2.5 mm2

(20 AWG to 12 AWG)

• CCI and CCI emergency wiring: 0.5 mm2

to 1.5 mm2

(20 AWG to 16 AWG)

Mounting

• Intended to mount within an IP20 (minimum) rated

consumer panel or breaker panel with integrated DIN

rail and dead cover

• 9 DIN modules (161.7 mm)

• For more information on mounting and installation in

panels with integrated DIN rail see the DIN Rail Best

Practices Application Note (P/N 048466) at

www.lutron.com

DALI® Buses

• The DALI® Power Module has an integrated bus power

supply that provides a guaranteed current of 128 mA

(maximum of 250 mA) to power each bus

• The DALI® Power Module is a DALI® single master

controller and therefore no other controllers or sensors

may exist on the same DALI® bus

• Some DALI® loads may be polarity sensitive; refer to

individual manufacturers’ specifications for proper

connection to the DALI® bus

• Short circuit protection with automatic re-start

(610 ms shutdown delay with a 3 second re-start

followed by 800 ms shutdown delay with 160 ms

retry time)

Troubleshooting and Maintenance

Features

• Maintains redundant memory of control gear

programming for ease of single- and multi-control

gear replacement

• After installation, “TEST” button verifies DALI® wiring

on all fixtures