Exterior Wash Pro S QUAD Outdoor-rated QUAD color wash light with creative control

Physical

• Length: 141 mm (5.55 inch)
• Width: 155 mm (6.10 inch)
• Height: 236 mm (9.29 inch)
• Weight: 4.4 kg (9.7 lbs)

Dynamic Effects

• Intensity: 0 - 100%
• Color mixing: RGB + CTC (Color Temperature Control)
• Color temperature control: 1000 K - 12500 K in 50 K steps

Control and Programming

• Control systems: DMX, RDM
• User interface: Magnetic sensor for local diagnostics and focusing
• Stand-alone control: Up to 20 scenes with individual fade/hold times
• Control resolution: 8-bit DMX control of each color
• Dimmer resolution: 16-bit DMX control of intensity
• DMX channels: 6/3/7/4 (Standard/Basic/Extended/Raw)
• DMX compliance: USITT DMX512/1990
• RDM compliance: ANSI/ESTA E1.20
• DMX/RDM transceiver: Galvanic-isolated RS-485
• Firmware update: Serial upload via DMX link

Optics

• Light source: 4 x high-power RGBW LEDs
• Minimum LED lifetime: 100,000 hours (to > 70% luminous output)*
• LED manufacturer: Osram
• Binning: Tight color and flux binning
• Calibration: Full Gamut Color Calibration (1 step MacAdam ellipse)

Beam Angle Options

• Native beam angle: 8°
• Narrow micro lens: 10°
• Medium micro lens: 16°
• Wide micro lens: 30°
• Very wide micro lens: 54°
• Asymmetric micro lens: 9° x 56°

Photometric Data

• CRI (Color Rendering Index): > 70
• CCT: 1000K - 12500K (Default 4000K)
• Luminous Output:
  • Full: 1800 lm
  • Red: 620 lm
  • Green: 1320 lm
  • Blue: 470 lm
    (*Measured in steady state at 25 °C ambient.)

Construction

• Housing: Cast Aluminum
• Color: Traffic grey RAL 7042 or Traffic white RAL 9016 (other colors available on request)
• Surface treatment: Anodized and electrostatic powder-coated
• Protection rating: IP66
• Effective Projected Area (EPA): 0.026 m² / 0.038 m²
• Impact resistance: IK08
• Corrosion resistance: C5 High (ISO 12944-6)
• Vibration resistance:
  • 1.0g Sinusoidal (IEC 60068-2-6)
  • 0.7g RMS Random (IEC 60068-2-64)
  • 3.0g (ANSI C136-31)

Installation

• Mounting: Adjustable bracket
• Orientation: Any
• Minimum distance to illuminated surfaces: 0.1 m (0.3 ft)

Connections

• Power connection: 2 m (6.5 ft) cable tail open-ended
• Power input cable (EU models): H07RN-F 3G 1.0 mm², 450/750 V, VDE
• Power input cable (US models): PVC SJTW 3 x 1.31 mm² (16 AWG) 105° C 300 V VW-1
• Data connection: 2 m (6.5 ft) open-ended 6-conductor combined In/Out cable tail
• Hybrid power/data cables (in & thru): 8-pin custom connectors available on request

Electrical

• AC power: 100 - 240 / 277 V nominal, 50/60 Hz
• Power supply unit: Auto-ranging electronic switch-mode
• Typical half-cycle RMS inrush current: 12 A
• Surge protection: 4 KV
• Max earth leakage: 0.5 mA
• Power factor:
  • 0.99 @110 V / 120 V
  • 0.94 @208 V / 230 V
  • 0.92 @277 V
• Max current draw:
  • 0.35 A @100 V
  • 0.29 A @120 V
  • 0.15 A @230 V
  • 0.13 A @277 V

Power Consumption

• Maximum: 35 W (Reduced mode: 28 W)*
• Idle: 2.0 W*
  (*Measurements at nominal voltage, +/- 10%.)

Thermal

• Cooling: Convection
• Max ambient temperature: 45° C (113° F)*
  (*Fixture regulates output above this temperature to prevent overheating.)
• Min ambient temperature: -30° C (-22° F)**
  (**Power must be maintained below -20° C (-4° F).)
• Total heat dissipation: 119 BTU/hr (+/- 10%)

Environmental

• RoHS, REACH, WEEE, Proposition 65: Compliant
• Efficacy (max output): 43 lm/W
• LWR (Lumen-to-Weight Ratio): 340 lm/kg (154 lm/lb)*
• Packaging: FSC certified cardboard inlay and outer box

Approvals

• Global CB Certification/IECEE: IEC 60598-2-5 (IEC 60598-1)
• EU Safety: EN 60598-2-5 (EN 60598-1), EN 62493
• EU EMC: EN 55015, EN 55032, EN55035, EN 61547, EN 61000-3-2, EN 61000-3-3
• US Safety: ANSI/UL 1598
• US EMC: 47 CFR Part 15 Class B
• Canadian Safety: CSA C22.2 No. 250.0
• Canadian EMC: ICES 003(B), ICES 005(B)
• Australia/NZ: RCM
• United Kingdom: UKCA
• India: BIS IS 10322 (Part 5/Section 5)

Ordering Information - Fixtures

• Exterior Wash Pro S QUAD, EU, grey: P/N MAR-90590001
• Exterior Wash Pro S QUAD, US, grey: P/N MAR-90590005
• Exterior Wash Pro S QUAD, EU, white: P/N MAR-90590101

Ordering Information - Accessories

• Micro Lens Pro S - Narrow: P/N MAR-90590026
• Micro Lens Pro S - Medium: P/N MAR-90590027
• Micro Lens Pro S - Wide: P/N MAR-90590028
• Micro Lens Pro S - Very Wide: P/N MAR-90590029
• Micro Lens Pro S - Asymmetric: P/N MAR-90590030
• Baffle Snoot Pro S QUAD: P/N MAR-90590017
• Exterior Wash Pro Multitool: P/N MAR-90590025
• Hybrid PD cable tail In/Out 0.5 m, black: P/N MAR-91700020
• Attachment plate for safety wire: P/N MAR-90590050
• Hybrid PD cable tail In/Out 0.5 m, white: P/N MAR-91700022