Exterior Wash Pro XL CTC Outdoor-rated wash light with color temperature control

Physical

• Length: 175 mm (6.89 inch.)
• Width: 351 mm (13.82 in.)
• Height: 438 mm (17.24 in.)
• Weight: 17.7 kg (39.0 lbs.)

Dynamic Effects

• Intensity: 0 - 100 %
• Color temperature control: 2400K - 6500K

Control and Programming

• Control systems: DMX, RDM
• User interface: Magnetic sensor for local diagnostics and focusing
• Stand-alone control: Up to 20 scenes with individual fade/hold times
• Control resolution: 8-bit DMX control of each color
• Dimmer resolution: 16-bit DMX control of intensity
• DMX channels: 3/3 (Standard/Basic)
• DMX compliance: USITT DMX512/1990
• RDM compliance: ANSI/ESTA E1.20
• DMX/RDM transceiver: Galvanic-isolated RS-485
• Firmware update: Serial upload via DMX link

Optics

• Light source: 21 x 2400K, 21 x 4000K, 22 x 6500K white color LEDs
• Minimum LED lifetime: 100,000 hours (to >70% luminous output)*
• LED manufacturer: Cree
• Binning: Tight color and flux binning
• *Figure obtained under manufacturer's test conditions at Ta = 25° C.

Beam Angle Options

• Native beam angle: 7°
• Narrow micro lens: 9°
• Medium micro lens: 15°
• Wide micro lens: 30°
• Very Wide micro lens: 50°
• Asymmetric micro lens: 8° x 60°

Photometric Data

• CRI (Color Rendering Index): >70
• CCT: 2400K - 6500K (default 4000K)
• LUMINOUS OUTPUT*:
  • 2400K: 8200 lm
  • 4000K: 17,000 lm
  • 6500K: 13,000 lm
• *All photometric data measured in steady state (30 minutes warm-up time) at 25° C ambient.

Construction

• Housing: Cast Aluminum
• Color: Traffic grey RAL 7042 (other colors available on request)
• Surface treatment: Anodized and electrostatic powder-coated
• Protection rating: IP66
• Effective Projected Area (EPA): 0.0149 m² / 0.180 m²
• Impact resistance: IK08
• Corrosion resistance: C5 High (ISO 12944-6)
• Vibration resistance: 1.0g (Sinusoidal, IEC 60068-2-6), 0.7g RMS Random (IEC 60068-2-64), 3.0g (ANSI C136-31)

Installation

• Mounting: Adjustable bracket
• Orientation: Any
• Minimum distance to illuminated surfaces: 0.4 m (1.3 ft.)

Connections

• Power connection: 2 m (6.5 ft.) cable tail open-ended
• Power input cable type (EU models): H07RN-F 3G 1.0 mm², 450/750V, VDE
• Power input cable type (US models): PVC SJTW 3 x 1.31 mm² (16AWG) 105° C 300 V VW-1
• Data connection: 2 m (6.5 ft.) open-ended 6-conductor combined input + output cable tail
• Hybrid power/data cables (in & thru) 8-pin custom connectors available on request

Electrical

• AC power: 100 - 240 / 277 V nominal, 50/60 Hz
• Power supply unit: Auto-ranging electronic switch-mode
• Typical half-cycle RMS inrush current: 14 A
• Surge protection: 4 KV
• Max earth leakage: 0.5 mA
• Power factor:
  • 0.99 @ 110 V / 120 V
  • 0.96 @ 208 V / 230 V
  • 0.90 @ 277 V
• Max current draw:
  • 2.50 A @ 100 V
  • 2.1 A @ 120 V
  • 1.1 A @ 230 V
  • 0.54 A @ 277 V

Power Consumption

• Maximum: 250 W (reduced mode 200 W)*
• Idle: 4.0 W*
• *Measurements made at nominal voltage. Allow for a deviation of +/- 10%. Idle: all LEDs at zero intensity

Thermal

• Cooling: Convection
• Maximum ambient temperature (Ta max.): 45° C (113° F)*
• Minimum ambient temperature (Ta min.): -30° C (-22° F)**
• Total heat dissipation (calculated, +/- 10%): 853 BTU/hr
• *Above this temperature, the fixture regulates output to protect from overheating.
• **Power must be maintained below -20° C (-4° F).

Environmental

• RoHS: Compliant
• REACH: Compliant
• WEEE: Compliant
• Proposition 65: Compliant
• Efficacy (max output): 70 lm/W
• LWR*: 960 lm/kg (436 lm/lb)*
• Packaging: FSC certified cardboard inlay and outer box
• *LWR = Lumen-to-Weight Ratio

Approvals

• Global CB Certification/IECEE: IEC 60598-2-5 (IEC 60598-1)
• EU safety: EN 60598-2-5 (EN 60598-1), EN 62471, EN 62493
• EU EMC: EN 55015, EN 55032, EN 55035, EN 61547, EN 61000-3-2, EN 61000-3-3
• US safety: ANSI/UL 1598
• US EMC: 47 CFR Part 15 Class B
• Canadian safety: CSA C22.2 No. 250.0
• Canadian EMC: ICES 003(B), ICES 005(B)
• Australia/NZ: RCM
• United Kingdom: UKCA
• India: BIS IS 10322 (Part5/section5)

Ordering Information - Fixtures

• Exterior Wash Pro XL CTC, EU, grey: P/N MAR-90590012
• Exterior Wash Pro XL CTC, US, grey: P/N MAR-90590016

Ordering Information - Accessories

• Micro Lens Pro XL - Narrow: P/N MAR-90590041
• Micro Lens Pro XL - Medium: P/N MAR-90590042
• Micro Lens Pro XL - Wide: P/N MAR-90590043
• Micro Lens Pro XL - Very Wide: P/N MAR-90590044
• Micro Lens Pro XL - Asymmetric: P/N MAR-90590045
• Exterior Wash Pro Multitool: P/N MAR-90590025
• Hybrid PD cable tail In/Out 0.5 m, black: P/N MAR-91700020
• Attachment plate for safety wire: P/N MAR-90590050
• Baffle Snoot Pro XL CTC: P/N MAR-90590024
• Hybrid PD cable tail In/Out 0.5 m, white: P/N MAR-91700022