FEATURES
- Pure white LED engine with 3000 K CCT.
- No color temperature variation during zoom and dimming.
- Flicker-free operation—LED driver frequency suitable for all camera applications.
- Whisper-silent—Combines convection and forced air cooling with user-selectable output vs. sound level control.
- Fully electronic dimmer/shutter control with various dimming curves and tungsten red-shift emulation.
- Vibrant CMY color mixing with a superior palette of colors ranging from rich, saturated primary colors to light and smooth pastel shades.
- Variable CTB—tungsten to daylight CCT control and expansion of the CMY palette that stays true to the black body curve.
- Color wheel—6 interchangeable dichroic filters + open.
- Fresnel lens: 1:4 zoom—precise, silent and fast zoom.
- PC lens (optional): 1:5 zoom—precise, silent and fast zoom.
- Internal barndoor system with two shutter blades and iris. Shutter blades can overlap for full blackout and the entire system rotates +/- 100°. Repeats cues with great precision.
- Precise and tight iris with adjustable dynamic effects.
- Animotion™ FX System—Internal dimming effect macros for stunning 3D mid-air and projection effects.
- Super precise and silent pan/tilt movement and positioning due to 3-phase stepper motor technology and absolute position monitoring.
- Compact size—L: 452 x W: 480 x H: 745 mm / L: 17.8 x W: 18.9 x H: 29.3 in.
- Low weight—28.5 kg/62.9 lbs
- Foam rubber (SIP) flight case insert for secure shipment.
SPECIFICATIONS
PHYSICAL
Length: 452 mm (17.8 in.)Width: 480 mm (18.9 in.) across yokeHeight:
755 mm (29.8 in.) maximum
745 mm (29.4 in.) head straight up
Weight: 28.5 kg (62.9 lb.)Minimum center-to-center distance in side-by-side installation: 730 mm (28.8 in.)DYNAMIC EFFECTS
Pre-programmed effects: Two ranges of FX, independent or synchronized/combinedColor mixing: CMY, independently variable 0 - 100%Color wheel: 6 x interchangeable dichroic filters + open, indexing, continuous rotation, random colorIris: Variable 0 - 100%Barn doors: Internal, two blades with individually controllable insertion, +/- 100° module rotationDimmer/shutter: 0 - 100% continuous dimming, regular and random strobe and pulse effects, instant open and blackoutColor temperature control: Variable 3000 - 7000 KDimming options: Choice of four dimming curvesZoom: MotorizedPan: 540°Tilt: 268°Position correction system: Absolute position monitoringFocus: Range varies with zoom angle, from approx. 2 m (6.6 ft.) / 6 m (19.7 ft.) to infinity
CONTROL AND PROGRAMMING
DMX channels: 24DMX compliance: USITT DMX512-ARDM compliance: ANSI/ESTA E1.2016-bit control: Dimming, pan and tiltMovement control options: Tracking and vectorSetting and addressing: Control panel with backlit graphic display and jog wheel or via DMXFixture Identification: User-settable ID numberTransceiver: Opto-isolated RS-485Fixture software update: USB memory device or over DMX link
OPTICS
Light source: 468 W custom Martin LED engineMinimum LED lifetime: 50,000 hours (to >80% luminous output)*Zoom range with Fresnel lens (standard): 14° - 60° one-tenth peak (1:4)Zoom range with PC lens (optional): 11° - 58° one-tenth peak (1:5)*Figure obtained under manufacturer's test conditionsPHOTOMETRIC DATALight engine luminous output: ≥ 31,500 lumensFixture luminous output with Fresnel lens (standard): 8,500 lumensFixture luminous output with PC lens (optional): 9,500 lumensCRI (Color Rendering Index) : >90CQS (Color Quality Scale): >90TM-30 Rf (IES TM-30-15 Fidelity Index): >90TM-30 Rg (IES TM-30-15 Gamut Index): >98TLCI (Television Lighting Consistency Index): >90CCT: 3000 K (+/- 250 K)
* All Photometric Data measured in steady state (30 minutes warm-up time) at 25°C ambient.
CONSTRUCTIONHousing: High-impact flame-retardant thermoplasticColor: BlackProtection rating: IP20INSTALLATIONMounting points: 4 pairs of 1/4-turn locksLocation: Dry location only, must be fastened to surface or structureOrientation: AnyMinimum distance to combustible materials: 0.2 m (8 in.)Minimum distance to illuminated surfaces: 2.0 m (6.6 ft.)CONNECTIONSAC power input: Neutrik TRUE1 socket (accepts Neutrik TRUE1 NAC3FX-W connector)DMX and RDM data in/out: 5-pin locking XLR
ELECTRICAL
AC power: 120-240 V AC nominal, 50/60 Hz
Power supply unit: Auto-ranging electronic switch mode
Typical half-cycle RMS inrush current at 230 V, 50 Hz: 10.3 A
Power Factor: 0.99 @ 120 V / 208 V , 0.98 @ 230 V / 240 V
Typical current draw: 5.0 A @ 120 V , 2.9 A @ 208 V , 2.6 A @ 230 V , 2.2 A @ 240 V *
Power Consumption
Typical: 596 W *
Idle: 64 W *
* Measurements made at nominal voltage. Allow for a deviation of +/- 10%.
Typical: full output white, no effects moving, regulated fan speed.
Idle: no output, no effects moving, regulated fan speed.
THERMALCooling: Combined convection and forced air (temperature-regulated, low noise, user-definable levels)Total heat dissipation (calculated, +/- 10%): 2000 BTU/hr.Maximum surface temperature, steady state, at 40° C ambient: 75° C (167° F)Maximum ambient temperature (Ta max.): 40° C (104° F)Minimum ambient temperature (Ta min.): 5° C (41° F)ENVIRONMENTALRoHS: CompliantREACH: CompliantWEEE: CompliantProposition 65: CompliantEfficacy (max output): 16 lm/wLWR*: 333 lm/kg (151 lm/lb)
LWR = Lumen-to-Weight Ratio
APPROVALSEU safety: EN 60598-2-17, EN 62471, EN62493EU EMC: EN 55015, EN 55032, EN 55103-2, EN 61000-3-2, EN 61000-3-3, EN 61547US safety: UL 1573US EMC: FCC Part 15 Class ACanadian safety: CSA C22.2 No. E598-2-17Canadian EMC: ICES-003 Class AAustralia/NZ: RCMINCLUDED ITEMSTwo omega brackets with 1/4 turn fasteners for rigging clamp attachmentRELATED ITEMSMartin Companion Cable: P/N 91616091Martin Companion Software Suite (including firmware uploader): Free download from www.martin.com
ACCESSORIES
Gelframe MAC Encore: P/N 91001000Set of Followspot Handles MAC Encore: P/N 91001001HUPC Lens Assy MAC Encore Wash: P/N 91616110HUSIP Packaging MAC Encore Family: P/N 91616115HUCables and connectors: Power Input Cable, H07RN-F, 2.5 mm2, bare ends to Neutrik TRUE1 NAC3FX-W (female), 1.5 m (4.9 ft.): P/N 91611797 Power Input Cable, H07RN-F, 2.5 mm2, bare ends to Neutrik TRUE1 NAC3FX-W (female), 5 m (16.4 ft.): P/N 91611786 Power Input Cable, SJOOW, 12 AWG, bare ends to TRUE1 NAC3FX-W (female), 1.5 m (4.9 ft.): P/N 91610173 Power Input Cable, SJOOW, 12 AWG, bare ends to TRUE1 NAC3FX-W (female), 5 m (16.4 ft.): P/N 91610174 Cable Connector, Neutrik PowerCON TRUE1 NAC3FX-W (female): P/N 91611789*Please order SIP variant fixtures to obtain the required SIP foam flightcase insertsInstallation hardware: G-clamp (suspension with fixture hanging vertically downwards only): P/N 91602003 Quick Trigger Clamp (suspension with fixture hanging vertically downwards only): P/N 91602007 Half-coupler Clamp: P/N 91602005 Safety Cable, SWL 60 kg, BGV C1 / DGUV 17, black: P/N 91604006 Safety Cable, SWL 60 kg, BGV C1 / DGUV 17, silver: P/N 91604007Flightcase: Two-unit Flightcase for MAC Encore™*: P/N 91515048
ORDERING INFORMATION
MAC Encore™ Wash WRM EPS (in cardboard box, polystyrene packaging): P/N 90234025MAC Encore™ Wash WRM SIP (in cardboard box with SIP foam flightcase insert): P/N 90234030MAC Encore™ Wash WRM, white finish, EPS (in cardboard box, polystyrene packaging): P/N 90234035HU
4.8 
