發佈您的產品
Class 250 Cast Iron Standard Wafer Silent Check Valves - 103MAP

Class 250 Cast Iron Standard Wafer Silent Check Valves - 103MAP

Series 103MAP class 250 cast iron standard wafer silent check valves are designed for liquids and gases where flow reversal can cause surge and water hammer. Used extensively in pump suction and discharge. Maximum temperature rating 500psi at 150 degrees F.

規格
  • Features

    • Spring closes the disc before flow reversal, preventing surge and water hammer
    • Mating surfaces of the disc and seat are hand lapped for best possible sealing
    • Disc is fully guided at top and bottom to insure alignment and sealing at any installation angle
    • Disc begins to open at .5 psi
    • Disc opens 1/3” per inch of line size, greater than similar competitive products, for enhanced flow
    • Bodies are designed to accommodate 110% flow of equivalent pipe size
技術規格
  • 唯一參考103MAP-Silent-Check-Valves
  • 產品系列Specialty Products
  • 產品組合Silent Check Valves
  • 類型对象(单个对象)
  • 發佈日期2024-06-05
  • 版本號1
相關
  • 主材料铸铁
  • 設計國家/地區美國
  • 製造國家/地區美國
分類
  • BIMobject 類別管道 - 阀门
  • IFC 分類阀门
  • UNSPSC 名稱Ball check valves
  • UNSPSC 代碼40141618
  • Uniclass 2015 代碼Pr_65_54_40_13
  • Uniclass 2015 說明Check valves
  • CSI MasterFormat 2014 代碼40 05 65
  • CSI MasterFormat 2014 標題Valves for Pump Control and Check Service
  • OmniClass 編號23-27 31 19
  • OmniClass 標題Check Valves
  • CSI UniFormat II 代碼D20
  • CSI UniFormat II 標題PLUMBING

發售地區

北美
加拿大
美國
墨西哥