發佈您的產品
QF Long Radius Elbow 14ga

QF Long Radius Elbow 14ga

Nordfab manufactures ducting for use in dust, mist, and fume collection systems.

Quick-Fit® 14 gauge Elbows have rolled ends for use with Quick-Fit Clamps, allowing quick assembly / disassembly and relocation. Learn more about the advantages of Quick-Fit ducting.

Available in 90°, 60°, 45°, and 30° with a radius of 2.5. Other CLRs available upon request. Standard 1.5 radius 14ga elbows are also available.

All 14 gauge elbows are supplied in solid-welded construction, providing a leak-free seam. Elimination of air leakage improves dust collection system efficiency, providing energy cost savings.

Because elbows are a ductwork component which typically experiences higher wear than other components, 14 gauge, 12 gauge and 10 gauge elbows are an excellent alternative for standard duty elbows which may have required frequent replacement.

This is a directional elbow supplied with an arrow to indicate the direction of flow.

  • Available in Galvanized or optional carbon steel
  • Available with flanged ends in diameters up to 72", and other various end styles. Please specify direction if ordering ends other than QF.
  • Elbows in even heavier gauges can be supplied in solid welded construction at an additional cost. Optional gauges standard 22 or 20, 18, 16, 12 and 10

Contact Nordfab or your local Nordfab dealer for assistance with larger sizes and material / gauge options.

規格
  • A. General Fabrication Requirements: Comply with SMACNA's "HVAC Duct Construction Standards - Metal and Flexible," Ch. 3, "Round, Oval, and Flexible Duct," based on indicated static-pressure class unless otherwise indicated.

    1. Construct ducts of galvanized sheet steel unless otherwise indicated. 
    2. Basis-of-Design Product: Subject to compliance with requirements, provide Nordfab Ducting, LLC; Quick Fit (QF) Duct.

      B. Connection Joints: Joint types are fabricated in accordance with SMACNA's "HVAC Duct Construction Standards - Metal and Flexible," for static-pressure class, applicable sealing requirements, materials involved, duct-support intervals, and other provisions in SMACNA's "HVAC Duct Construction Standards - Metal and Flexible."

      1. Quick Fit Joints in Ducts 3 to 24 inches (76 to 510 mm) in diameter. Flange: Optional.
      2. Flanged Joints in All Ducts Greater than 24 inches (610 mm) in diameter.

      C. Longitudinal Seams: Seam types are fabricated in accordance with SMACNA's "HVAC Duct Construction Standards - Metal and Flexible," Figure 3-2, "Round Duct Longitudinal Seams," for static-pressure class, applicable sealing requirements, materials involved, duct-support intervals, and other provisions in SMACNA's "HVAC Duct Construction Standards - Metal and Flexible."

      1. Fabricated round ducts 3 to 24 inches (76 to 510 mm) in diameter to have laser-welded or plasma-welded longitudinal seams.
      2. Fabricated round ducts above 24 inches (610 mm) in diameter to have plasma-welded longitudinal seams.
    技術規格
    • 唯一參考us-qf-long-radius-elbow-14ga
    • 產品系列Quick-Fit Clamp Together Ducting
    • 產品組合Elbows
    • 類型对象(单个对象)
    • 發佈日期2024-05-08
    • 版本號1
    相關
    • 主材料镀锌钢板
    • 設計國家/地區美國
    • 製造國家/地區美國
    分類
    • BIMobject 類別暖通空调 - Dust Collection
    • IFC 分類风管管件
    • ETIM 代碼EG015540
    • ETIM 名稱Fittings, flanges and connectors
    • Uniclass 2015 代碼Pr_65_65_25
    • Uniclass 2015 說明Ductwork and fittings
    • CSI MasterFormat 2014 代碼23 31 13.19
    • CSI MasterFormat 2014 標題Metal Duct Fittings
    • OmniClass 編號23-33 49 00
    • OmniClass 標題HVAC Ductwork

    發售地區

    北美
    伯利茲
    加拿大
    哥斯達黎加
    巴拿馬
    法屬聖馬丁
    波多黎各
    百慕達
    美國
    英屬維爾京群島
    墨西哥