Nuheat Mesh Electric Floor Heating System 120V

Mesh is an on-site adjustable "strip and roll" solution.

Mesh is best suited for square and rectangular shaped areas where some on-site flexibility is needed. The heating wire is attached to a roll of adhesive mesh material. During installation, the “roll” can be cut, turned, and adhered to the subfloor to provide floor heat in the desired areas of the room. Mesh kits comes in 32 sizes. Choose the mesh kit that is best suited for the size of the room/area and configure on-site to provide floor heat in the desired areas of the room.

As Featured on Amazon.com

規格

Technical Info:
Material: Two single conductor Tefzel-coated resistance wires covered by a tin-plated copper braid and then coated with a durable copolymer (PVC) outer jacket. Heating cable is attached to a self-adhesive fiberglass mesh material.
Operating Voltage: 120 V.
Power Output: 12 watts per square foot.
Maximum Continuous Exposure Temperature: 194°F (90°C).
Heating Cable: 2-wire, grounded, twisted pair with PVC outer jacket.
Cold Lead: 2-wire, 18 AWG plus ground braid layer; 10 ft (3m) length.