REHAU | EURO-DESIGN 60 | DOORS | ENTRANCE

Same rebate seal in frame and sash:

Easier disposition, less warehousing, rational production.

Optional profiles with extruded, weldable seals:

Reduced costs due to reduced inventory and faster production, excellent fit and firm adhesion of the seal to the main profile. The weldable seals are replaceable in case of damage.

The same reinforcements can be used in the frame and posts, reinforcements identical to those of the other REHAU profile systems:

Reduced warehousing, mixing up the reinforcements is avoided.

Reinforcement chamber depth 35mm:

Despite good thermal insulation, the use of reinforcements with a large construction depth and thus the best static properties is possible.

Retaining lug in the reinforcement chamber of the wing profile:

Fixation of the single-leg reinforcements, thus no drilling through the reinforcement when installing the fittings (three-hole drilling). Faster processing, longer tool life.

Fastening of the load-bearing hardware components through 2 PVC walls or additionally through the steel reinforcement:

Reliable transfer of the sash loads.

Hardware axis 13 mm:

Possible use of reinforced hardware components.

Identical rebate formation in the sash, frame and mullion profile:

Same milling pattern, therefore no need to change the milling cutter or a second milling machine.

Overall depth of the profiles 60mm, 3-chamber design:

In conjunction with appropriate glazing, the windows offer good protection against cold and noise.

Appealing design:

Slim and elegant profile view, pleasing look with radii and bevels.

Two circumferential seals with wide contact on the frame and sash:

Protection against drafts, dust, water and heat loss.

Oblique fold with a smooth fold base in the frame:

Easy cleaning, support water drainage in drainage.