Round Non-Tapered Segmented Column

Royal Corinthian manufactures round non-tapered columns from 3 composite materials: Composite Fiberglass, Polymer Stone, and FRP Lightweight Fiberglass. All three materials are available in all of the sizes below. We are able to create additional diameters by taking the bottom portions of our tapered columns so if you are looking for 6”, 22”, 28”, 30”, or 36” diameter non-tapered porch columns, please call or email for additional information. We differ from the rest of the industry in that our non-tapered columns have astragals that are part of the shaft which saves a lot in terms of installation costs if you have to attach loose astragals on site. If you do not desire to have an attached neck ring, we are able to remove them from the shaft at no cost. The majority of our non-tapered columns come with a cap support ring that holds up a Tuscan capital, which is very useful especially when using some of our heavier materials. The cap support ring is removed in instances where decorative capitals are used. The structural supports chart below corresponds to our RoyalCast fiberglass columns: Synthetic stone columns tend to be slighter thicker and RoyaLite columns tend to be thinner. Exact specifications for the aforementioned are available upon request or via shop drawings. The load bearing specifications chart pertains only to RoyalCast and RoyalStone columns: RoyaLite columns are typically used as column covers but in instances where we assemble them into whole columns, the load-bearing capacities will be significantly lower than on the chart below.

規格

- 6” diameter: Load bearing capacity up to 8,000 lbs
- 8” diameter: Load bearing capacity up to 10,000 lbs
- 10” diameter: Load bearing capacity up to 14,000 lbs
- 12” diameter: Load bearing capacity up to 18,000 lbs
- 14” diameter: Load bearing capacity up to 20,000 lbs
- 16” diameter: Load bearing capacity up to 20,000 lbs
- 18” diameter: Load bearing capacity up to 20,000 lbs
- 20” diameter: Load bearing capacity up to 20,000 lbs
- 24” diameter: Load bearing capacity up to 20,000 lbs
- 30” diameter: Load bearing capacity up to 20,000 lbs
- 36” diameter: Load bearing capacity up to 20,000 lbs

技術規格

唯一參考round-non-tapered-segmented-column
產品系列Columns
產品組合Round
類型对象（单个对象）
發佈日期2025-11-12
版本號1

連結

產品網址https://royalcorinthian.com/round-non-tapered-columns/
安裝說明https://royalcorinthian.com/installation-instructions/

相關

主材料玻璃纤维
設計國家/地區美國
製造國家/地區美國

分類

BIMobject 類別景观 - 园林艺术
Uniclass 2015 代碼EF_20_30
Uniclass 2015 說明Columns
OmniClass 編號23-13 35 11 13 11
OmniClass 標題Columns

發售地區

北美
伯利茲
加拿大
千里達和多巴哥
危地馬拉
古巴
哥斯達黎加
多米尼克
多米尼加共和國
安圭拉
安提瓜和巴布達
尼加拉瓜
巴哈馬
巴巴多斯
巴拿馬
庫拉索
格林納達
格陵蘭島
法屬聖馬丁
波多黎各
洪都拉斯
海地
牙買加
特克斯和凱科斯群島
瓜德羅普
百慕達
美國
美屬維爾京群島
聖基茨和尼維斯
聖巴泰勒米
聖文森與格瑞那丁
聖皮埃爾和密克隆群島
聖盧西亞
英屬維爾京群島
荷屬聖馬丁
荷蘭加勒比區
蒙塞拉特島
薩爾瓦多
開曼群島
阿魯巴
馬提尼克
墨西哥