Tempation C, Modular Desk, Height Adjustable

Product family

• Desks
• Telescopic height adjustment
• Tool-less ratchet adjustment
• Crank-operated height adjustment
• Gas spring height adjustment
• Motorised height adjustment in two heights
• Linking and add-on elements
• Return table

The continuous design language must facilitate a visually matching combination of the various height adjustment options.

Frame system

The frame system is based on a beam solution consisting of a central or double beam and table top support. The supporting frame always adapts perfectly to the shape of the table top. With angled desk tops, the supporting frame under the desk follows the full size table top. From a desk width of 1800 mm, an additional stabilisation strut is inserted in the front area of the table top. The table top supports ensure a high level of stability, and are also used to hold third level adapters, a CPU holder and laptop holder.

Desks with telescopic, tool-less ratchet adjustment, crank-operated height adjustment or electric motor (650 - 1250 mm)

The user-friendly frame system for desks that adjust either telescopically, by tool-less ratchet adjustment or by means of a crank consists of a central beam with welded table top supports. This steel frame is screwed to the table top. It varies according to the width of the table top. The leg frames are screwed securely to the frame to provide the optimum transmission of force into the frame system.

Desks with gas spring or motorised height adjustment (720 – 1200 mm)

The frame system is based on a beam solution consisting of a double beam and welded table top supports. The motors and control or synchronous shaft for height adjustment using a gas spring are framed perfectly by the double beams. The optimum connection between the leg frames and frame system is achieved by means of a sturdy screw system with six bushes that ensures the optimum transmission of force to the frame system.

The compact construction of the connection between columns and frame system, and the optimum positioning of the columns, must eliminate the need for an additional cross-piece between the leg frames.

Leg frames

The desking programme includes the following options for height adjustment:

Telescopic height adjustment:

• 620 – 850 mm continuous

• Cross section rectangular vertical tube 90 x 50 mm

Tool-less ratchet adjustment by means of ratchet adjustment:

• 620 – 850 mm

• Cross section rectangular vertical tube 90 x 50 mm

Crank-operated height adjustment:

• 620 – 850 mm continuous

• Cross section rectangular vertical tube 90 x 50 mm

Gas spring height adjustment:

• 720 – 1180 mm continuous

• Stroke length 460 mm with single telescope

• Cross section rectangular vertical tube 100 x 60 mm

Motorised height adjustment (single telescope):

• 720 – 1200 mm continuous

• Stroke length 480 mm with single telescope

• Cross section rectangular vertical tube 100 x 60 mm

Motorised height adjustment temptation ci (double telescope):

• 650 - 1250 mm

• Stroke length 600 mm with double telescope

• Cross section rectangular vertical tube 90 x 60 mm

The leg frames have adjustment glides to balance out uneven floors.

Depending on the application, asymmetrical leg frames of 800 and 900 mm depth or symmetrical leg frames of 600 mm are used for the end leg frames.

Telescopic, tool-less ratchet adjustment or crank-operated height adjustment

The leg frames are screwed securely to the central beam. The holder forms a strong yet simple interface for quick assembly. The combination of positive fit and positive connection helps to achieve the high level of stability.

Gas spring height adjustment

The desks have control columns with gas spring technology. The columns are synchronised by means of a shaft. The telescopic leg has a high quality chrome-plated surface.

Motorised height adjustment (720 – 1200 mm)

The desks have a control column with one drive per leg frame. The motors are contained in steel housings on the outside that are connected to the frame system by means of six bushes, and ensure the optimum transmission of force to the frame. The smooth gliding movement ensures that the single or double telescope runs safely, guaranteeing a high level of stability.

Motorised height adjustment (650 - 1250 mm)

Motorised height adjustment with double telescope is provided in the range 650 - 1250 mm. It has a sensor function as standard. A modern up-down control element is provided with the option of an inset control in the table top. A wireless charging element that can be fitted under the table top for the wireless charging of smartphones is available.

Castors

Sets of castors are available as accessories for desks with telescopic, tool-less ratchet adjustment or crank-operated height adjustment. The castors are 50 mm in diameter. The desk is 55 mm higher if castors are used.

Spacers

For motorised height-adjustable tables, black spacers are available for a variety of configurations to guarantee a safety distance of 30 mm. If free-standing screens are used, spacers are also available that guarantee a safety distance of 100 mm.

Table tops

There is a choice of rectangular and free-form table tops.

Dimensions

Linear worktops:

• Depth: 600 mm, width: 800/1000/1200/1400/1600/1800/2000 mm
• Depth: 800 mm, width: 800/1000/1200/1400/1600/1800/2000 mm
• Depth: 900 mm, width: 800/1000/1200/1400/1600/1800/2000 mm

Further worktops in the following free formats:

• Integra 80°
• Integra concave/Integra R80
• Integra 90° with 436/600/800 connection
• Integra 120° symmetrical and asymmetrical
• Integra 135° symmetrical and asymmetrical

It is possible to link the worktops with various add-on elements and linear desks.

Carrier material/substrate

The desktops are available as 19 mm three-ply fine chipboard with melamine resin finish or veneer.

The use of three-ply fine chipboard is appropriate to the substrate as per EN 312-2003.

Only E1 quality wood materials are to be used.