S.I.A.I.

LATERIZI ALVEOLATER BIO CLASSE 60

ALVEOLATER® lightweight blocks with horizontal holes are lightened clay bricks, characterized by a gross bulk density between 500 and 680 kg/m³ and a hole percentage of 55% ≤ φ ≤ 70%. They are suitable for building infill walls, including in seismic zones, with no load-bearing function. Their layer configurations are complemented by layers of insulating material (synthetic or mineral fiber) in a cavity or as external insulation ("cappotto"). ALVEOLATER® horizontal-hole clay blocks are "smooth" elements, produced in various sizes and thicknesses. Available thicknesses range from 10 to 35 cm.

規格

Muratura in blocchi di laterizio alleggerito forato, tipo Alveolater® 60 marcati CE in cat I S.A.C. 2+ secondo UNI EN 771-1. Classificazione dei blocchi secondo ex UNI 8942: forato per tamponamento UNI BF 00- Classification of blocks according to standard UNI EN 771-1: LD Block dimensions: cm ……x cm …… and height of cm …… Dimensional tolerance ……… (T1, T2, Tm according to UNI EN 771-1) Tolerance range ……… (R1, R2, Rm according to UNI EN 771-1). Gross bulk density …………… kg/m³ Tolerance ……… (D1, D2, Dm according to UNI EN 771-1). Installation: horizontal holes with class M …… mortar Horizontal and vertical mortar joints. The blocks must have a hole percentage between 60 and 70%. The equivalent thermal conductivity of the block will be determined through the calculation set out in standard UNI EN 1745:2012, based on the conductivity value given in Table A1 of Appendix A of standard UNI EN 1745:2012 as a function of the bulk density of the raw material used, or on an experimental value obtained on the clays used at the production plant, according to the methods and testing frequency established by the aforementioned standard. All declared characteristics will be documented through the attestation required for CE marking purposes, indicating the Certification Body and the certificate number if manufactured under control system 2+. The U-value (thermal transmittance) must not exceed ……… W/m²K. The Sound Reduction Index Rw of the wall must be no lower than ……… dB, based on experimental testing or calculation. These performance characteristics may also be documented through a manufacturer's declaration, with specific reference to test reports and/or calculations.

技術規格

唯一參考ALVEOLATER
類型对象（单个对象）
發佈日期2026-09-08
版本號1

連結

相關

設計國家/地區意大利
製造國家/地區意大利

分類

BIMobject 類別建筑材料 - 砖石建筑
IFC 分類墙壁
OmniClass 編號23-13 21 00
OmniClass 標題Blocks and Bricks

發售地區

欧洲
丹麥
俄羅斯
保加利亞
克羅地亞
冰島
列支敦士登
匈牙利
北馬其頓
塞浦路斯
塞爾維亞
奧地利
奧蘭
安道爾
希臘
德國
意大利
愛沙尼亞
愛爾蘭
拉脫維亞
挪威
捷克共和國
摩爾多瓦
摩納哥
斯洛伐克
斯洛文尼亞
斯瓦爾巴特群島
根息
梵蒂岡
比利時
法國
法羅群島
波斯尼亞黑塞哥維那
波蘭
澤西島
烏克蘭
瑞典
瑞士
白俄羅斯
盧森堡
直布羅陀
立陶宛
羅馬尼亞
聖馬力諾
芬蘭
英國
荷蘭
葡萄牙
西班牙
阿爾巴尼亞
馬恩島
馬耳他
黑山