Luminaire type
Post-top or bracket-mounted luminaire with flat cover. With an intelligent label for quick access to luminaire information by means of QR code.
Light management
You can choose between
- No power reduction
- Power reduction via control circuit. Switching off a control circuit causes the luminaire luminous flux to be set to 50%. With SLR (Smart Lighting Ready) equipment for retrospective integration of components for light management systems. The standardised Zhaga-compliant base is attached to the lower cover. The luminaire is designed for the D4i standard and Zhaga/D4i certified.
- Self-regulating power reduction via integral evaluation electronics. Reduction of luminaire luminous flux to 50 % for a time period of 7 hours (-2 h/+5 h). The central point of the switch-on duration is defined new on a daily basis . With SLR (Smart Lighting Ready) equipment for retrospective integration of components for light management systems. The standardised Zhaga-compliant base is attached to the lower cover. The luminaire is designed for the D4i standard and Zhaga/D4i certified.
Applications
Collection roads, Residential roads, Low-traffic roads, Pedestrian zones, Arcades, Passages, Paths in parks and green areas, Residential facilities, Stairs, Access areas, Car parks, Works roads.
Mounting methods
Post-top and bracket-mounted luminaire for mast spigot Ø 76 mm. Inclination angle for post-top mounting 0°, 10°, for bracket mounting -10°, 0° adjustable. Also suitable for applications with masts Ø 42, 48 and 60 mm via reduction pieces to be ordered separately. Mast mounting via two stainless steel fixing screws in accordance with EN 60598-2-3.
Optical system
As MLT version (Multi-Lens Technology), consisting of highly efficient UV and temperature-resistant lens systems in 4-fold configurations. For lighting roads according to P lighting classes. With asymmetrical wide light intensity distribution. With PMMA cover, clear. Retrofitting a rear / side shield is possible as an accessory to be ordered separately. Further beam characteristics are available for flexible adaptation to customer-specific lighting tasks.
LED system
Luminaire luminous flux and light color fixed, with luminous flux stabilization at end of life (CLO). Luminous efficiency of luminaire upto 139 lm/W; Power Faktor λ > 0,95. Light colour from warm white to neutral white, correlated colour temperature (CCT) 2200 K - 4000 K, general colour rendering index (CRI) Ra > 70. Colour locus tolerance (initial MacAdam) ≤ 5 SDCM. Further LED light colours available on request. Mean rated service life LCLO(tq 25 °C) = 100,000 h. The light source is replaceable according to the ecodesign requirements (VO (EU) 2019/2020). Versions with 3-level switch for adjusting various luminous flux options on request.
Luminaire body
Luminaire body of die-cast aluminium. Sea weather-suitable coating on request. With sulphur-free sealings. Safety class (EN 61140): II, protection rating (DIN EN 60529): IP66, impact resistance level in accordance with IEC 62262: IK09. Mast available upon request.
Suitable for the following support programs*
CEE BAR-EQ110 (FR)
*No responsibility is taken for the correctness of this information. The applicant is responsible for verifying compliance with the requirements of the funding program.
