發佈您的產品
Tago S 135 LED
Tago S 135 LED
Tago S 135 LED

    Tago S 135 LED

    Luminaire type
    LED free-standing luminaire with direct and indirect luminous flux distribution, dimmable.

    Optical system
    Optical system consisting of a prismatic PMMA cover lens for the direct component and a clear PMMA cover for the indirect component. With direct-indirect light distribution. Glare evaluation according to UGR rating (EN 12464-1) < 19.

    規格
    • LED system
      Luminaire luminous flux 13500 lm, connected load 95,00 W, Power Faktor λ > 0,9, luminous efficiency of luminaire 142 lm/W. Light colour neutral white, correlated colour temperature (CCT) 4000 K, general colour rendering index (CRI) Ra > 80. Mean rated service life L80(tq 25 °C) = 50,000 h. The light source is replaceable according to the ecodesign requirements (VO (EU) 2019/2020).

      Luminaire body
      Luminaire body of aluminium. Consisting of luminaire head, stand profile and base. Surface powder-coated with smooth finish, colour white (RAL 9016). Luminaire head and post in angular version. The base is u-shaped. Dimensions of luminaire head: 835 mm x 300 mm, luminaire height: 1960 mm. Safety class (EN 61140): I, protection rating (DIN EN 60529): IP20, impact resistance level in accordance with IEC 62262: IK02, testing temperature of wire glow test in accordance with IEC 60695-2-11: 650 °C. Weight: 14,7 kg.

      Electrical version
      With electronic control gear unit, dimmable (integrated). Luminaire is switchable and dimmable by means of touch functionality via DALI control terminals (Touch DIM). The control gear unit is replaceable in accordance with the ecodesign requirements (VO (EU) 2019/2020). Operation according to touch dim principle is achieved via a touch sensor integrated into the luminaire post flush with the post surface. Direct and indirect components can be separately dimmed. The luminaire complies with the fundamental requirements of applicable EU regulations and product safety legislation and bears the CE symbol.


      Light management
      With integrated passive infrared presence detector and daylight sensor. An active luminaire will reduce the light output by 70% if no movement is detected over a 30-minute period. After another 30 minutes without movement detection, the luminaire is switched off. The daylight sensor achieves a constant brightness level surrounding the luminaire when activated. The brightness reference value can be changed and saved via push-button. A DIP switch facilitates setting and combining light management operating modes (movement sensor on/off, daylight sensor on/off).

    技術規格
    • 唯一參考tago-s-135-led
    • 產品系列Indoor lighting
    • 產品組合Free-standing and desktop luminaires
    • 類型对象(单个对象)
    • 發佈日期2023-09-21
    • 版本號1
    • 高度 (mm)1960
    • 寬度 (mm)300
    • 深度 (mm)835
    連結
    相關
    • 主材料铝
    • 設計國家/地區德國
    • 製造國家/地區德國
    • 淨重 (Kg)14.7
    分類
    • BIMobject 類別照明 - 地板已安装
    • IFC 分類灯具
    • ETIM 代碼EC000300
    • ETIM 名稱Floor luminaire

    發售地區

    亚洲 欧洲
    卡塔爾
    丹麥
    土耳其
    保加利亞
    沙地阿拉伯
    克羅地亞
    科威特
    匈牙利
    阿拉伯聯合酋長國
    塞爾維亞
    阿曼
    奧地利
    希臘
    德國
    意大利
    愛爾蘭
    挪威
    捷克共和國
    斯洛伐克
    斯洛文尼亞
    比利時
    法國
    波斯尼亞 黑塞哥維那
    波蘭
    瑞典
    瑞士
    羅馬尼亞
    芬蘭
    英國
    荷蘭
    葡萄牙
    西班牙
    黑山