VORT HRW 60 MONO EVO

Shockproof and anti-UV plastic resin structure.
• Nominal diameter: 160 mm.
• Ceramic exchanger with hexagonal cells. High heat exchange efficiency (up to 90% at minimum air flow).
• High efficiency EC motor fan; five operating speeds, to maximize performance when needed, or to minimize noise and consumption.
• On board controls to switch on/off the machine, to adjust the operating mode and for the fan speed selection.
• Three different operating modes:
• Continuous ventilation with heat recovery: the product cyclically extracts and introduces air to and from the room, recovering the energy stored in the exchanger;
• Ventilation with air extraction only: stale air is extracted from the environment;
• Ventilation with air intake only: the product introduces fresh air into the environment.
• Two air filters, a 65% IsoCoarse and a pre-filter for dust, both easily removable for washing.
• LED light for filters status placed in the lower part of the chassis, immediately behind the front cover.
• Mechanical quick closing system of the air delivery integrated into the product chassis.
• External rubber grille, which can be installed from the outside using plugs or from the inside, through the hole in the wall.
• Insect mesh, which can be installed into the duct from inside.
• Possibility of connection to remote sensors C-TEMP and C-HCS for the automatic management of the product.