Commercial Glass Aluminum Doors Model 451

Key Product Features

• Max Width: 22’2” (6,705.6mm)
• Max Height: 16’1” (4,902.2mm)
• Door Assembly: Stile and rail assembly of aluminum alloy 6063-T6, 1 3/8" thick stiles and rails, joined with self tapping screws.
• Air Infiltration: Meets IECC® requirements for air infiltration with 3rd party tested values below 0.4 cfm/ft2.
• Rails: Top and bottom rails with 3 1/2" wide, lower intermediate rail 1 3/8", upper rail 1 5/8", minimum wall thickness 0.062".
• Stiles: Single end stiles are 3 1/2" wide, center stile 3" wide, minimum wall thickness 0.062".
• Springs: 10,000 cycles
• Glazing: 1/8" (3mm) in 9 options, 1/4" (6mm) in 5 options, 1/2" (13 mm) in 4 options, 5/8" (16 mm) in 3 options.
• Finish: Clear anodized
• Wind Load: Provide to meet the design/performance requirements specified.
• Lock: Interior mounted slide lock.
• Weatherstripping: Flexible bulb-type strip at bottom section.
• Track: Provide track as recommended by manufacturer to suit loading required and clearances available.
• Manual Operation: Pull rope or chain hoist
• Electric Motor: Provide UL listed electric operator, equal to Genie Commercial Operators, size and type as recommended by manufacturer to move door in either direction at not less than 2/3 foot or more than 1 foot per second.

Door Construction

• Commercial Aluminum Glass Doors
• Aluminum glazing stop
• Large glass panels allow maximum light and visibility
• 1-3/8” thick section with special reinforcing design
• Vinyl seal between sections
• 2-1/4” integrated reinforcing rib on upper intermediate rail for doors 10’3” wide and over
• Aluminum panels that match the rail color are available.
• Flexible vinyl bottom door seal