Rolling Service Doors Model 900

Key Product Features

• Max Width: 14’*
• Max Height: 14’*
• Mounting: Face of wall or between jambs
• Operation: Manual push-up: chain hoist where door weight exceeds manual effort
• Curtain: 2" galvanized steel curved slats (#2 profile), primed gray, white, beige or brown; 24-gauge steel with alternating endlocks
• Locking: Slide bolts on manual operation; padlockable chain keeper with chain hoist (padlock not included)
• Bottom Bar: Galvanized steel double angle with weatherstrip
• Guides: G-guide design; steel factory painted black
• Brackets: 1/4" or 3/16" steel plates with permanently sealed ball bearings
• Counter Balance: Steel pipe of adequate size to restrict a maximum deflection of .033" per linear foot. Oil tempered, 20,000 cycle helical springs
• Hood: 24-gauge galvanized steel round hood; primed gray, white or beige
• Wind Load: Standard wind load rated with a minimum of 20 psf

*Larger sizes may be available. Maximum height and maximum width are independent of each other and may vary based on slat profile, material and gauge. Consult factory for more information. 800-764-1457

Slat Profiles

No. 2 - Curved-faced single crown slat available in up to 20-gauge steel, 20-gauge stainless steel, or up to 18-gauge B&S aluminum (mill, clear, or bronze anodized). Depth of crown: 1/2", 1/8" on centers.

No 17 - Flat-faced slat in up to 20-gauge steel, 20-gauge stainless steel, or 16 B&S gauge aluminum (mill, clear, or bronze anodized). Depth of crown: 1/2", 1 7/8" on centers.

Secur-Vent® - Perforated slat provides optimal security and ventilation. Slat consists of 1/16" diameter hole offereing 20 to 25% open area over length of each slat. Available in No. 17 flat slat up to 14' wide x 12' high.