Rolling Service Doors Model 926

Key Product Features

• Max Width: 12’*
• Max Height: 12’*
• Mounting: Face of wall or between jambs
• Operation: Manual push-up: chain hoist where door weight exceeds manual effort
• Curtain: 26-gauge, #17 slats are 2” flat style profile, constructed of hot-dipped galvanized steel with polyester primer and baked on white polyester top coat paint finish
• Locking: Slide bolts on manual operation; padlockable chain keeper with chain hoist (padlock not included)
• Bottom Bar: Galvanized steel, double angle design with bottom astragal
• Guides: Roll-formed 1/8” thick steel channel guides (G guides) and 3/16” thick steel wall angles comprise the guide assembly
• Brackets: 1/4" or 3/16" steel plates with permanently sealed ball bearings
• Counter Balance: Counterbalance barrel assembly is made from 4” steel pipe and helical torsion springs designed for 20,000 cycles with cast iron spring fittings
• Wind Load: Standard wind load rated with a minimum of 20 psf
  

*Larger sizes may be available. Maximum height and maximum width are independent of each other and may vary based on slat profile, material and gauge. Consult factory for more information. 800-764-1457

Slat Profiles

No 17 - Flat-faced slat in up to 20-gauge steel, 20-gauge stainless steel, or 16 B&S gauge aluminum (mill, clear, or bronze anodized). Depth of crown: 1/2", 1 7/8" on centers.

Secur-Vent® - Perforated slat provides optimal security and ventilation. Slat consists of 1/16" diameter hole offereing 20 to 25% open area over length of each slat. Available in No. 17 flat slat up to 14' wide x 12' high.