Impulse Linear XL B3271

IMPULSE DUAL SIT/STAND CONSOLES
WINSTED'S IMPULSE - DUAL SIT/STAND CONSOLES. feature dual adjustability for the most configurable work space solution! With just the push of a button, you can adjust the monitor with smooth pivot and tilt functionality and raise/lower the work surfaces from 30” to 46”, independently of each other to meet the specific needs of all your users. Perfect for multi-user, multi-shift 24/3 control room situations, Winsted's Impulse Dual Sit/Stand consoles are easy to configure for each staff member while still delivering the ergonomic benefits of a sit/stand desk. These control room consoles feature:

Electric-Lift Legs
Versa-Trak Monitor Mounting System
Adjustable Monitor Mounts
Three Monitor Mount Post Heights
CPU Pedestal with Leg Leveler Mounts
Perforated Privacy Panel
Safeguard Edge Work Surface
Easy-Access Cable Management

規格

1.GENERAL DESCRIPTION 1.1 Impulse Dual Sit/Stand Consoles see Appendix "A" - "D" for typical styles and measurements. 1.2 The contractor shall supply a system capable of supporting specified electronics. 1.3 The console shall be comprised of end frames with dual electric-lift legs. The system will also feature two ergonomically height-adjustable work surfaces with an integrated aluminum Versa-Trak mounting system for LCD monitor arrays. 1.4 The console shall feature two 1.18" (30mm) thick MDF core, high-pressure, Graphite Nebula laminated work surfaces with Safeguard Edge. 2.STANDARDS 2.1 All optional racks integrated with the console shall comply with Electronic Industry Association (E.I.A.) specifications for rack mounting ANSI/E standard RS-310. 2.2 All monitor mounts used with the Versa-Trak mounting system are compliant with the Mounting Interface Standard established by the Video Electronics Standards Association (VESA). 3.DRAWINGS 3.1 The contractor shall supply five sets of scaled drawings for each console assembly showing the location of all the specified electronics in isometric view in addition to a plan (top) and front views. 3.1 The specification of sizes and dimensions shown in the drawings shall have a tolerance of not more than +/- 0.062" (1.6mm). 4.MODULAR PRE-ENGINEERED CONSTRUCTION All components within the system shall be: 4.1 Of a pre-engineered modular construction, i.e: constructed from a series of independent sectional compartments. 4.2 Available from a pre-defined set of manufacturers model numbers. 4.3 Free from alterations to the design either prior to or following installation. The assembly of the console shall be accomplished without the need for either welding or carpentry work. 4.4 Constructed of a steel super-structure framework consisting of end frames connected by a sheet metal horizontal modesty panel. Optional external decorative side panels are available in TruForm or laminated MDF core. 5.SELF SUPPORTING SKELETON FRAMEWORK The self supporting skeleton framework shall: 5.1 Be installed at the site in advance of any external finishing panels. The framework shall be fully capable of supporting all specified electronics without the need for attachment of any external panels. 5.2 Be capable of being supplied to site in knockdown (flat packed) form and be capable of assembly without welding or carpentry work. 5.3 Include curved rear horizontal modesty panel constructed of 11 gauge* (.119") formed sheet metal. Modesty panel will connect, and span, 14 gauge (.074") end frames to form a complete structure. 6.COMPONENTS 6.1 End Frames 14 gauge (.074") end frames shall be a minimum of 4-1/2" (114mm) in width, capable of integrating two sets of electric-lift legs along with two cable followers. End frames will support a fully loaded console and incorporate 3/8" (10mm) diameter threaded adjustable glides and a duplex power outlet. Quick-release lift-off access panels will be located on the inside and the outside of each end frame. 6.2 Horizontal Modesty Panel 16 gauge (.060") formed sheet metal modesty panel shall incorporate an easy-access cable raceway. 6.3 Work Surfaces The console shall incorporate two 1.18" (30mm) thick MDF core, high-pressure, Graphite Nebula laminated work surfaces with Safeguard Edge. Front work surface will include a cable raceway mounted to the underside. 6.4 Perforated Privacy Panel The rear work surface shall feature a 12” high perforated black painted 16 guage (.060”) steel privacy panel. 6.5 Versa-Trak / Monitor Arrays Console shall feature a fully integrated black anodized aluminum track system capable of supporting a wide variety of monitor arrays. The Versa-Trak will provide uninterrupted lateral adjustablity of monitors. Constructed of extruded 6105-T5 aluminum with a T-slot profile. Monitor array support posts shall be available in 15" (381mm), 28-1/2" (723mm), and 42" (1066mm) heights. The support posts shall be 1.5" (38mm) in diameter with a wall thickness of .120" (2.9mm). Monitor arrays shall be mounted to the Versa-Trak with ball spring drop-in T-nuts or to the surface with supplied hardware. 6.6 Electric-Lift Legs Console shall integrate two sets of stretcherless electric lift legs with a load capacities of 520 pounds per work surface. The electric lift legs shall provide quick & easy work surface adjustment from 30"- 46" high. 7.FINISH AND COLOR 7.1 All exterior and frame steel components including end frames, modesty panels, and optional CPU pedestal shall be zinc oxide wash primer with a black powder coat textured finish. 8.OPTIONAL ACCESSORIES 8.1 A full range of optional accessories shall be available such as outlets, electrical boxes, CPU pedestal, file cabinets, monitor mounts, and LED task lighting with VESA mount or magnetic base. 9.MOUNTING HARDWARE 9.1 Mounting hardware for the specified electronics shall be available upon request. All hardware needed for assembly will be provided. 10.INSTRUCTIONS 10.1 Fully detailed assembly instructions in the English language shall be supplied with both written and pictorial descriptions for each item/model numbered component. 11.PACKAGING 11.1 Each component part number shall be independently marked and packed into double or triple ply corrugated outer cartons and shall be suitable for storage and shipping to site without damage. 12.WARRANTY 12.1 • A LIFETIME WARRANTY on all fixed steel structure frame components. • A 10 year warranty on adjustable, sliding or hinged components and laminated surfaces. • A 5 year warranty on Endurance Plus and TruForm surfaces. • A 2 year warranty on all electrical components and chairs.

技術規格

唯一參考winsted-impulse-b3271
產品系列Desk System
產品組合Impulse
類型对象（单个对象）
發佈日期2020-01-31
版本號1
寬度 (inch)83
深度 (inch)36.5

連結

相關

主材料金属
次要材料层压板
設計國家/地區美國
製造國家/地區美國

分類

BIMobject 類別家具 - 办公桌
IFC 分類家具
UNSPSC 名稱Office Equipment and Accessories and Supplies
UNSPSC 代碼44
Uniclass 2015 代碼Pr_40_30_25_04
Uniclass 2015 說明Audio visual furniture
CSI MasterFormat 2014 代碼12 56 52
CSI MasterFormat 2014 標題Audio-Visual Furniture
OmniClass 編號23-21 11 00
OmniClass 標題Commercial Furniture
CSI UniFormat II 代碼E20
CSI UniFormat II 標題FURNISHINGS

發售地區

欧洲	亚洲	北美	非洲	南美洲	大洋洲
丹麥	不丹	伯利茲	中非共和國	厄瓜多爾	北馬里亞納群島
俄羅斯	中國	加拿大	乍得	哥倫比亞	圖瓦盧
保加利亞	也門	千里達和多巴哥	佛得角	圭亞那	基里巴斯
克羅地亞	亞美尼亞	危地馬拉	利比亞	委內瑞拉	密克羅尼西亞聯邦
冰島	以色列	古巴	利比里亞	巴拉圭	巴布亞新畿內亞
列支敦士登	伊拉克	哥斯達黎加	剛果	巴西	帛琉
匈牙利	伊朗	多米尼克	剛果民主共和國	智利	庫克群島
北馬其頓	北韓	多米尼加共和國	加納	法屬圭亞那	所羅門群島
塞浦路斯	南韓	安圭拉	加蓬	烏拉圭	托克勞
塞爾維亞	卡塔爾	安提瓜和巴布達	南蘇丹	玻利維亞	斐濟
奧地利	印尼	尼加拉瓜	南非	福克蘭群島（即馬爾維納斯群島）	新喀里多尼亞
奧蘭	印度	巴哈馬	博茨瓦納	秘魯	新西蘭
安道爾	台灣	巴巴多斯	厄立特里亞	蘇里南	東帝汶
希臘	吉爾吉斯斯坦	巴拿馬	吉布提	阿根廷	法屬波利尼西亞
德國	哈薩克斯坦	庫拉索	喀麥隆		湯加
意大利	土庫曼斯坦	格林納達	坦桑尼亞		澳洲
愛沙尼亞	土耳其	格陵蘭島	埃及		瑙魯
愛爾蘭	塔吉克斯坦	法屬聖馬丁	埃塞俄比亞		瓦利斯和富圖納群島
拉脫維亞	孟加拉國	波多黎各	塞內加爾		瓦努阿圖
挪威	尼泊爾	洪都拉斯	塞拉利昂		皮特凱恩群島
捷克共和國	巴勒斯坦	海地	塞舌爾		紐埃
摩爾多瓦	巴基斯坦	牙買加	多哥		美國本土外小島嶼
摩納哥	巴林	特克斯和凱科斯群島	安哥拉		美屬薩摩亞
斯洛伐克	敘利亞	瓜德羅普	尼日利亞		薩摩亞
斯洛文尼亞	斯里蘭卡	百慕達	尼日爾		諾福克島
斯瓦爾巴特群島	新加坡	美國	岡比亞		關島
根息	日本	美屬維爾京群島	布基納法索		馬紹爾群島
梵蒂岡	柬埔寨	聖基茨和尼維斯	布隆迪
比利時	格魯吉亞	聖巴泰勒米	幾內亞
法國	汶萊	聖文森與格瑞那丁	幾內亞比索
法羅群島	沙地阿拉伯	聖皮埃爾和密克隆群島	摩洛哥
波斯尼亞黑塞哥維那	泰國	聖盧西亞	斯威士蘭
波蘭	澳門	英屬維爾京群島	毛里塔尼亞
澤西島	烏茲別克斯坦	荷屬聖馬丁	毛里裘斯
烏克蘭	科威特	荷蘭加勒比區	津巴布韋
瑞典	科科斯（基林）群島	蒙塞拉特島	烏干達
瑞士	約旦	薩爾瓦多	留尼汪
白俄羅斯	緬甸	開曼群島	盧旺達
盧森堡	老撾	阿魯巴	科摩羅
直布羅陀	聖誕島	馬提尼克	科特迪瓦
立陶宛	英屬印度洋領地	墨西哥	突尼斯
羅馬尼亞	菲律賓		納米比亞
聖馬力諾	蒙古		索馬里
芬蘭	越南		聖多美和普林西比
英國	阿塞拜疆		聖赫勒拿島
荷蘭	阿富汗		肯尼亞
葡萄牙	阿拉伯聯合酋長國		莫桑比克
西班牙	阿曼		萊索托
阿爾巴尼亞	香港		蘇丹
馬恩島	馬來西亞		西撒哈拉
馬耳他	馬爾代夫		貝寧
黑山	黎巴嫩		贊比亞
			赤道幾內亞
			阿爾及利亞
			馬拉維
			馬約特
			馬達加斯加島
			馬里