發佈您的產品
Model 73 Sump Pump
Model 73 Sump Pump
Model 73 Sump Pump

    Model 73 Sump Pump

    Our Model 73 Sump Pump is designed to remove unwanted groundwater in residential basement sump applications. The 0.33 HP Model 73 is an economical option when a sump pump is required. The Model 73 is compact, lightweight, and economical. Additionally, it is a fully automatic sump pump with a built-in float snap-action switch, so, it can be installed in minutes and depended upon for years. The Model 73’s motor housing and pump housing are constructed of cast iron to maximize heat dissipation and give you the extra strength of a cast iron discharge. The cap and and base are constructed of engineered plastic. This durable plastic allows the Model 73 to withstand a wide variety of basement sump conditions. The corrosion resistant engineered plastic vortex impeller has a smooth surface allowing water and solids to pass freely through the pump.

    Every pump is submerged in water and tested to its published performance curve, ensuring it meets your expectations and delivers peace of mind right-out-of-the-box.

    Features and Benefits

    • Oil-filled motor and cast iron motor housing for optimal heat dissipation which prevents the pump from overheating
    • Automatic pump with a time-tested, reliable, preset, built-in snap action switch that makes for easy installation
    • Corrosion resistant engineered plastic vortex impeller to allow free passage of solids which prevents clogging and lessens downtime
    • Stainless steel float guard that prevents material or debris from collecting on the float ensuring proper operation every time
    • Compact and lightweight design allows the pump to fit in sump pits as small as 10" in diameter
    • Epoxy finish provides corrosion-resistance and extends the life of the pump in residential sump applications
    • Stainless steel screws and cord mounting hardware are rust resistant ensuring the pump can be relied upon for years of service
    • 100% Factory Tested - every pump is submerged in water and tested at the factory to ensure that it performs as expected when you receive it
    • Comes with a 2-year limited warranty giving you protection over your investment and the peace of mind you expect in a quality product
    規格
    • Shipping Weight: 20.39 lbs

      Shipping Dimensions: Height 10 3/8 in x Width 7 3/4 in x Length 10 in.

      Horsepower: 0.33

      Voltage: 115

      Phase: 1

      AMP: 5.5

      Hertz: 60

      RPM: 3450

      Discharge: 1-1/2" NPT

      Solids Handling: 1/2" (12 mm) spherical solids

      On/Off Points: 7-1/4" (18.4 cm) / 3" (7.6 cm)

      Impeller Material: Engineered Plastic

      Impeller Type: Vortex

      Cord Length: 9’ (3 m)

    技術規格
    • 唯一參考model-73-sump-pump
    • 產品系列Pumps
    • 產品組合Sump Pumps
    • 類型对象(单个对象)
    • 發佈日期2026-05-01
    • 版本號1
    相關
    • 主材料铸铁
    • 設計國家/地區美國
    • 製造國家/地區美國
    分類
    • BIMobject 類別管道 - 泵
    • IFC 分類促动器
    • Uniclass 2015 代碼Pr_65_53_24
    • Uniclass 2015 說明Drainage pumps
    • CSI MasterFormat 2014 代碼23 21 23
    • CSI MasterFormat 2014 標題Hydronic Pumps
    • OmniClass 編號23-27 17 00
    • OmniClass 標題Pumps

    發售地區

    北美
    伯利茲
    加拿大
    千里達和多巴哥
    危地馬拉
    古巴
    哥斯達黎加
    多米尼克
    多米尼加共和國
    安圭拉
    安提瓜和巴布達
    尼加拉瓜
    巴哈馬
    巴巴多斯
    巴拿馬
    庫拉索
    格林納達
    格陵蘭島
    法屬聖馬丁
    波多黎各
    洪都拉斯
    海地
    牙買加
    特克斯和凱科斯群島
    瓜德羅普
    百慕達
    美國
    美屬維爾京群島
    聖基茨和尼維斯
    聖巴泰勒米
    聖文森與格瑞那丁
    聖皮埃爾和密克隆群島
    聖盧西亞
    英屬維爾京群島
    荷屬聖馬丁
    荷蘭加勒比區
    蒙塞拉特島
    薩爾瓦多
    開曼群島
    阿魯巴
    馬提尼克
    墨西哥