发布您的产品
阔福VL3010工业垂直柔性堆积门
阔福VL3010工业垂直柔性堆积门
    已存档

    阔福VL3010工业垂直柔性堆积门

    阔福VL3010工业垂直柔性堆积门是专门为大尺寸的应用而设计。它几乎适用于所有对大尺寸门的应用需求。它的最大尺寸为8米x12米(宽x高)。 它以非常优良的稳定性和耐久性可以在船舶、矿山、重工、垃圾处理等较为复杂的环境下的使用。 它安装灵活,运行平稳,有极强的耐候性和超长的使用寿命。 是工业复杂环境应用的不二之选!
    规格
    • Door leaf • Door leaf made out of two layers of very strong vinyl-coated polyester fabric, separated by aluminium intermediate sections. • Intermediate section which gives strength to the door leaf and which creates a buffer between the inside and outside fabric walls. • Wind load is transferred to the vertical guide rails by the horizontal aluminium sections of the door leaf. • The door leaf is available in 9 standard colours. • Door leaf thickness:100 mm. • Aluminium guide rails. Bottom section • The bottom section, made of steel and aluminium, is connected to the lifting belt via the safety arresters. • The bottom section contains an optical safety edge and a rubber seal on the bottom edge that creates a seal between the door and the floor. • Optical safety edge. Safety arresters and wind lock in stainless steel • Safety arresters stop the door if the lifting belt becomes slack or, in an unlikely event, would break. • Wind lock system locks the door when the door is closed. Surface treatment • Steel components corrosion treatment: category 3 according to ISO 12944.2. Higher class on request. Aluminium, plastic, stainless steel, zinc electroplated steel (~10u). Fixing elements are mainly hot dip galvanized (FZV). Door leaf screws protected with Geomet. Standard door features • Door range: MIN: 1810 mm x (no MIN. height) MAX: 8000 x 12000 mm • Normal operating speed of 0.2-0.3 m/sec • Option: Increased opening speed of 0.4-0.6 m/sec • Temperature range: -35 °C to +70 °C • Compliance with all operational and safety instructions in EU Directives and the standards of the European Standardisation Committee (CEN) • Wind load (EN 12424) Class 2-5, 0.45-1.6 kPa, depending on size • Water resistance (EN 12425) Class 3, 0.11 kPa (for a closed door) • Air permeability (EN 12426) Class 2, 12 m3/(m2h) • Thermal transmittance (EN 12428) Depending on door size. Specific data on request • Sound reduction (ISO 717) 15 dB Rw • Operating system: Electrical operator Dimensions: x mm (WxH) Options: Door leaf:  Standard: Polyester, 1100 dtex with plasticised PVC coating  Option: Arctic fabric. For environmental temperatures down to -54°C  Option: Heat resistant fabric with silicone rubber coating  Option: Heat resistant fabric with aluminium coating  Option: Heat resistant fabric with aluminium polyurethane coating  Option: Sound reduction fabric  Option: Security fabric Vision panels 800mm x 800mm 800mm x 1600mm 1300mm x 800mm 1300mm x 1600mm Fabric color  Beige (RAL 1001)  Red (RAL 3001)  Blue (RAL 5005)  Green (RAL 6009)  Grey (RAL 7004)  Anthracite (RAL 7016)  White (RAL 9016)  White aluminium (RAL 9006)  Translucent white Header box  Gear motor on inside of the building  Gear motor on outside of the building  Gear motor in the door opening  Insulated  Stainless steel cladding and motor casing  Self-supporting header box Operator • Control system: PLC-based • Protection class, control cabinet IP65 • Protection class, limit switches IP67 • Protection class, motor brake IP55 • Protection class, push buttons IP65 • 3/phase 400V 50Hz power supply • Control voltage 24DC • Fusing: 16 A • Heat and cold resistance: -35 °C to +70 °C • Motor ratings: 0.47 - 2.8 kW Options  Radio remote control  Free contacts: 6 for control of user functions  “Open" (during closing process) if open button is used - door immediately stops and opens completely)  Pull switch for OPEN / CLOSE  External push-button, key switch  “One-button function” - opens or closes door, depending on actual status (e.g. radio, pull switch)  Additional safety (e.g. photo cell, radar)  Photo cell  Reduced opening height  Radar  Magnetic loop  Warning lights  Traffic lights  Interlocking door function Other supplementary equipment  Control cabinet in stainless steel  Heating element in the control cabinet  Emergency power switch  Clamp strip covers in the same colors as the fabric  Side jambs (if posts for installing the guide rails are not available)  Side jambs in stainless steel  Wind deflectors (in co
    技术规格
    • 唯一参考cra_3010_vl
    • 类型对象(单个对象)
    • 发布日期2017-08-29
    • 版本号1
    相关
    • 主材料纺织品
    • 次要材料
    分类
    • BIMobject 类别门 - 工业门
    • IFC 分类
    • UNSPSC 名称Doors
    • UNSPSC 代码301715
    Common.Footer.ValueProp.Image.AltText

    Revit 版 Design App

    只需单击一下,即可将族直接加载到您的 Revit 模型中

    获取一个更轻松地访问新对象、存储 Revit 族以及与团队协作的地方。

    • 勾选标记直接与 Revit 旁边的 BIM 对象一起工作
    • 勾选标记 2GB 云存储 - 存储您的 Revit 内容
    • 勾选标记 直接从 Revit 获取内含碳 LCA (A1-A3)