FRCM reinforcement Kimisteel INOX 800 system

Kimia

FRCM reinforcement Kimisteel INOX 800 system

Kimisteel INOX 800 is used for reinforcing masony and RC structures, construction of reinforced masonry perimetral beams, construction of reinforced masonry structures. Kimisteel INOX 800 is a unidirectional reinforcing fabric made out of micro stainless steel strands, very resistant against corrosion and very useful in case of support affected by rising damp issues and in general exposed to aggressive environments. The product, combined with inorganic matrix, can be used in consolidation works of existing masonry and RC structures.

规格

Structural reinforcement or seismic retrofitting of masonry structures, equipped with CVT for FRCM systems. The process includes the following application phases: cleaning the substrate and, if necessary, reconstruction or smoothing the surface with a suitable mortar. Apply a first layer of Basic MALTA M15/F mortar from Kimia S.p.A. or a similar product. The maximum thickness per coat is 5 mm. The mortar must have the following characteristics: maximum aggregate size UNI EN 1015-1: 1.2 mm; apparent density of fresh mortar UNI EN 1015-6: 1900 kg/m3; compressive strength after 28 days UNI EN 1015-12: >15 N/mm²; flexural strength at 28 days >4 MPa and will be CE marked as R2 mortar based on UNI EN 1504-3 and as class M15 masonry mortar according to EN 998-2 and as GP CS IV internal and external mortar according to UNI EN 998-1. While the product is still fresh, apply Kimisteel INOX 800 stainless steel fabric from Kimia S.p.A. or a similar product, applying light pressure with the spatula and/or trowel to embed the fabric in the matrix. The stainless steel mesh must guarantee the following characteristics: weight: 800 g/m2; steel used: AISI 316 stainless steel; theoretical steel thickness: 0.1 mm; unit resistance per unit length of the flexible steel wire mesh: 123.8 kN/m. Apply a further coat of the same matrix to the mesh using a metal spatula and/or trowel, for a total reinforcement system thickness of 10 mm. The reinforcement system has a CVT, pursuant to point 11.1, case C, of the NTC 2018, according to the qualification procedures for reinforcement systems in point 3 of the "Guideline for the identification, qualification and acceptance control of inorganic matrix fiber-reinforced composites (FRCM) to be used for the structural consolidation of existing buildings". The supply and installation of all the materials described above and anything else necessary for the finished work is included.

技术规格

唯一参考frcm-kimisteel-inox-800
类型对象（单个对象）
发布日期2026-04-13
版本号1

链接

产品网址https://www.kimia.it/en/pultruded-and-reinforcing-fabrics/kimisteel-inox-800

欧洲
丹麦
乌克兰
俄罗斯
保加利亚
克罗地亚
冰岛
列支敦士登
匈牙利
北马其顿
卢森堡
圣马力诺
塞尔维亚
塞浦路斯
奥兰
奥地利
安道尔
希腊
德国
意大利
拉脱维亚
挪威
捷克共和国
摩尔多瓦
摩纳哥
斯洛伐克
斯洛文尼亚
斯瓦尔巴特群岛
格恩西岛
梵蒂冈
比利时
法国
法罗群岛
波兰
波斯尼亚黑塞哥维那
泽西岛
爱尔兰
爱沙尼亚
瑞典
瑞士
白俄罗斯
直布罗陀
立陶宛
罗马尼亚
芬兰
英国
荷兰
葡萄牙
西班牙
阿尔巴尼亚
马恩岛
马耳他
黑山