只需单击一下，即可将族直接加载到您的 Revit 模型中
获取一个更轻松地访问新对象、存储 Revit 族以及与团队协作的地方。
直接与 Revit 旁边的 BIM 对象一起工作 - 2GB 云存储 - 存储您的 Revit 内容
- 直接从 Revit 获取内含碳 LCA (A1-A3)
已存档
Prado Red Pressed Facing Brick
The pressing process involves crushing the clay between two facing presses, which force it into a mold in the shape of the final unit. The press surfaces are in relief to produce raised and sunken areas in the units. The outer shape of the unit produced therefore depends on the mold cavity.
Facing bricks manufactured by pressing a mixture of clays and water. After drying off the water added for the extrusion, the bricks are fired in an oxidizing atmosphere in a Tunnel Kiln. Each model is burned at its own optimal firing temperature (always >1000º C).
Due to the carbonate content in the clay, the suction (initial rate of water absorption) of these products is greater than 0.10 gr/cm2 minute. To avoid having to wet the bricks before they are laid (a necessary, although not always applied, measure with suction of over 0.10 gr/cm2 minute), they are there forewaterproofed by immersion or soaking with a silicon compound after leaving the kiln and before being packed. This treatment improves their layability, facilitates cleaning and keeps wall attractive and free from contamination over a long period of time.
Revit 版 Design App
中文
