Dimensions and weight
Width: 235cm / 115 cm
Height: 110 / 145 / 180 / 220 cm
Post: 115 x 125 mm.
Wood components: 19 x 120 mm.
Trellis slats: 38 x 38 mm profile planed and with bevelled top.
Rail: 38 x 125 mm.
Loggia beam: 19 x 125 mm.
Joist: 38 x 100 mm.
Product numbers and combinations
Parts of the Fura modular system:
Trellis / plank with or without supporting beams, in three heights and two widths.
Posts for straight-line attachment to planks, attachment at 90-degree angles, 135-degree angles and T-post, 90-degrees.
Pergola bars, overlays, loggia bars, cast iron parts.
Trellis / plank sections:
A, B, C, D, E, F, G, H, I, K, S: These planks have the dimensions C-C 235 cm. The same planks are available in C-C 115 cm modules, in the A2, B2 categories, etc.
The planks are available in different heights, 100 cm, 135 cm, 170 cm and 220 cm. See figures.
Supporting posts:
S2, S5, S8 and S9. The posts are available in four heights 110 cm, 145 cm, 180 cm and 220 cm. When choosing a post, start with the basic size, for example S2 / 110.
For a straight-line attachment, please state S2 / 110 post height 110 cm - straight attachment.
Attachments at 90-degree angles, 135-degree angles or T-posts are also available, please see the downloadable drawings. For example: S5 / 145 post height, 145 cm T-post, etc.
All posts are ground-mounted 5 cm above ground surface. 2 iron fittings are included with each post.
Pergola beams:
Available in four versions:
PB1 length C-C 115 cm | total length 160 cm
PB2 length C-C 235 cm | total length 280 cm
PB3 length C-C 235 cm | total length 300 cm. NOTE! Without recesses for lintels
PB4 length optional. NOTE! Without recesses for lintels
6 pergola booms are needed per 235 cm section
3 pergola beams are needed per 115 cm section
Overlay:
Available in three versions:
Ö1 length C-C 115 cm | total length 115 cm
Ö2 length C-C 235 cm | total length 235 cm
Ö3 any length
Loggia beams:
LB Loggia beam
6 loggia beams are needed per 235 cm section
3 loggia beams are needed per 115 cm section
Append to product number
WOOD AND FINISH
For drawing templates in larch wood, please add ‘LARK’ after the item number.
For supporting posts in larch, please add ‘L’ after the item number.
Drawing templates and planks are available in AB-impregnated pine or untreated larch.
Standard coloursAB-impregnerad furu
Materials and surface treatments
AB-impregnerad furu.
Larch Wood.
Lengths of cut wood. Cast iron parts for attaching the posts.
Pine
Nola's pine is of high quality and comes from sustainable forestry. Pine is an environmentally friendly, domestically produced material. Damaged or untreated pine is quite easily attacked by decomposition processes; therefore, it is particularly important to repair damaged surfaces.
Larch
Larch has good durability in the outdoor environment, better than, for example, pine. The wood contains large amounts of resins and pitch, which can cause the larch to turn gray in an untreated state.
Steel
Nola uses high-quality steel with good strength in our products. Steel rusts if left untreated and must therefore be surface treated. This is done through electro-galvanization and powder coating, hot-dip galvanizing, or application of a zinc powder primer.
Hot-dip galvanized
Hot-dip galvanizing provides very strong protection against corrosion. The steel is dipped into a bath of hot liquid zinc. The zinc attaches and creates a surface coating on the steel part, which is then taken out of the bath and drained of excess zinc.
Assembly and placement
Delivered in sections planks, posts, crossbeams, etc.
The wooden parts are nailed to each other. The posts can be ground-mounted with the anchoring fixtures included, 2 for each post. In freestanding versions, 4 fixtures are needed to secure each post.
Maintenance
The pine can be painted or oiled as needed. Avoid painting pressure-treated wood during the first year as the paint may not adhere to new wood. Maintained as needed.
Hor dip galvanized steel
Hot-dip galvanized can be touch-up painted with so-called "cold galvanizing".
Download our general maintenance advice
Versions
Trellis section with or without beams, in three heights and two widths. Planks A-U. Please refer to the drawings of our different planks.
Examples
Fura is a classic wooden pergola system manufactured in prefabricated sections that are easy to construct.
Character
Fura a traditional wooden fence and pergola system manufactured in prefabricated sections that are easy to construct.
(7 评价)
