发布您的产品
QF Pipe
QF Pipe

    QF Pipe

    Quick-Fit® Duct Pipe has a laser welded seam and Quick-Fit (QF) rolled ends for use with Quick-Fit Clamps, allowing quick assembly / disassembly and relocation.

    • Available in galvanized steel and 304SS (as shown below) or optional 316SS or carbon steel
    • Available with flanged ends in diameters up to 72", and other various end types
    • Optional material gauges 18ga, 16ga, 14ga, 12ga and 10ga.
    • QF Pipe is a Nordfab Now® product so items in the most commonly used sizes and material are in stock and can typically be shipped the day after order placement.

    Contact Nordfab or your local Nordfab dealer for assistance with larger sizes and material / gauge options.

    Quick-Fit ducting has been used in a wide variety of applications, wherever dust collection or fine particulate transfer is required. Quick-Fit saves time and money on installation, is easy to clean out, is adaptable to existing ductwork, and is easily re-used during shop floor reconfigurations. Learn more about why Quick-Fit may be the best solution for you.

    规格
    • A. General Fabrication Requirements: Comply with SMACNA's "HVAC Duct Construction Standards - Metal and Flexible," Ch. 3, "Round, Oval, and Flexible Duct," based on indicated static-pressure class unless otherwise indicated.

      1. Construct ducts of galvanized sheet steel unless otherwise indicated. 304SS Optional.
      2. Basis-of-Design Product: Subject to compliance with requirements, provide Nordfab Ducting, LLC; Quick Fit (QF) Duct.

        B. Connection Joints: Joint types are fabricated in accordance with SMACNA's "HVAC Duct Construction Standards - Metal and Flexible," for static-pressure class, applicable sealing requirements, materials involved, duct-support intervals, and other provisions in SMACNA's "HVAC Duct Construction Standards - Metal and Flexible."

        1. Quick Fit Joints in Ducts 3 to 24 inches (76 to 510 mm) in diameter. Flange: Optional.
        2. Flanged Joints in All Ducts Greater than 24 inches (610 mm) in diameter.

        C. Longitudinal Seams: Seam types are fabricated in accordance with SMACNA's "HVAC Duct Construction Standards - Metal and Flexible," Figure 3-2, "Round Duct Longitudinal Seams," for static-pressure class, applicable sealing requirements, materials involved, duct-support intervals, and other provisions in SMACNA's "HVAC Duct Construction Standards - Metal and Flexible."

        1. Fabricated round ducts 3 to 24 inches (76 to 510 mm) in diameter to have laser-welded or plasma-welded longitudinal seams.
        2. Fabricated round ducts above 24 inches (610 mm) in diameter to have plasma-welded longitudinal seams.
      技术规格
      • 唯一参考us-qf-pipe
      • 产品系列Quick-Fit Clamp Together Ducting
      • 产品组Pipe & Clamps
      • 类型对象(单个对象)
      • 发布日期2024-05-09
      • 版本号1
      相关
      • 主材料镀锌钢板
      • 次要材料Stainless steel 304
      • 设计国家/地区美国
      • 制造国家/地区美国
      分类
      • BIMobject 类别暖通空调 - Dust Collection
      • IFC 分类风管管件
      • ETIM 代码EG015540
      • ETIM 名称Fittings, flanges and connectors
      • Uniclass 2015 代码Pr_65_65_25
      • Uniclass 2015 说明Ductwork and fittings
      • CSI MasterFormat 2014 代码23 31 13.19
      • CSI MasterFormat 2014 标题Metal Duct Fittings
      • OmniClass 编号23-33 49 00
      • OmniClass 标题HVAC Ductwork

      发售地区

      北美
      伯利兹
      加拿大
      危地马拉
      古巴
      哥斯达黎加
      圣卢西亚
      圣基茨和尼维斯
      圣巴泰勒米
      圣皮埃尔和密克隆群岛
      多米尼克
      多米尼加共和国
      安圭拉
      安提瓜和巴布达
      尼加拉瓜
      巴哈马
      巴巴多斯
      巴拿马
      库拉索
      开曼群岛
      格林纳达
      格陵兰岛
      法属圣马丁
      波多黎各
      洪都拉斯
      海地
      牙买加
      特克斯和凯科斯群岛
      特立尼达和多巴哥
      瓜德罗普
      百慕大
      美国
      美属维尔京群岛
      聖文森與格瑞那丁
      英属维尔京群岛
      荷属圣马丁
      荷蘭加勒比區
      萨尔瓦多
      蒙塞拉特岛
      阿鲁巴
      马提尼克
      墨西哥