发布您的产品
Fixed Industrial Stairs
Fixed Industrial Stairs
Fixed Industrial Stairs
Fixed Industrial Stairs

    Fixed Industrial Stairs

    4.4 out of 5 stars4.4(16 reviews)

    This stair solves:

    • Fixed Industrial Stairs for rooftop access, pit access, mezzanine access, or crossover obstacles
    • Four types of Industrial Stairs: walk-thru, to roof hatch access, to a platform, or crossover with a platform in the middle
    • Users can face the direction of travel for ascent or descent
    • Users can carry objects upon ascent or descent

    Reduce Costs and Increase Quality

    Reduce maintenance costs by using an aluminum stair which is naturally corrosion resistant with minimal ongoing maintenance or upkeep compared to steel stairs that corrode over time.  Reduce installation costs by using an aluminum stair which is a third the weight of steel, so it is easier to install, requiring less equipment.  Aluminum is high strength and is used in planes, cars, trucks, buses, trains, and buildings.  

    Reduce Risks

    With over 75 years of experience providing access solutions, we know the codes and are experts in this area.  Units are built to meet or exceed OSHA 1910 Subpart D design criteria.  Without the correct stair, there could be injury, liability, and loss of money, which puts companies' reputations and lives at stake.  

    Aesthetically Pleasing and Sustainable Material

    The standard aluminum mill finish will not rust or stain the surrounding structure.  Powder Coating is available to match the surroundings or stand out for safety. In addition, aluminum is 100 percent recyclable and retains its properties indefinitely.  

    Key Details of Stair

    • Fully welded construction used throughout
    • 8" x 2.29" x 1/4" aluminum structural channel stringers
    • Treads are bar grating (standard) both welded and bolted to the stringer
    • Treads tested to withstand over 3000-pound loading per tread
    • Stair Rail System with handrail (handrail/guardrail combo) are two-line, 1-1/4" Sch 40 Aluminum Pipe
    • 30 to 45-degree pitch
    • Treads widths up to 55-1/2" (clear tread)
    • 5 Year Warranty
    规格
    • SECTION 05 51 16 or 05 51 19

      FIXED ALUMINUM INDUSTRIAL STAIR

      PART 1 GENERAL

      1.1 SECTION INCLUDES

      A. Fixed Aluminum Industrial Stairs.

      1.2 RELATED SECTIONS

      A. Section 05 12 00 - Structural Steel Framing: Roof structure and opening support.

      B. Section 05 50 00 - Metal Fabrications: Miscellaneous metal supports.

      C. Section 06 10 00 - Rough Carpentry: Roof framing and opening support.

      D. Section 07 42 00 - Wall Panels: Roof curb flashing.

      1.3 REFERENCES

      A. OSHA 1910.25: Stairways.

      1.4 SUBMITTALS

      A. Submit under provisions of Section 01 30 00.

      B. Manufacturer's data sheets on each product to be used, including:

      1. Preparation instructions and recommendations.

      2. Storage and handling requirements and recommendations.

      C. Shop Drawings for Stairs:

      1. Plan and section of stair installation.

      1.5 DELIVERY, STORAGE, AND HANDLING

      A. Store products in manufacturer's unopened packaging until ready for installation.

      B. Store stair until installation inside under cover. If stored outside, under a tarp or suitable cover.

      1.6 WARRANTY

      A. Limited Warranty: Five years against defective material and workmanship, covering parts only, no labor or freight. Defective parts, if deemed so by the manufacturer, will be replaced at no charge, freight excluded, upon inspection at manufacturer's plant which warrants same.

      PART 2 PRODUCTS

      2.1 MANUFACTURERS

      A. Acceptable Manufacturer: Precision Ladders, LLC, which is located at: P. O. Box 2279; Morristown, TN 37816-2279; Toll Free Tel: 800-225-7814; Tel: 423-586-2265; Fax: 423-586-2091; Web: www.PrecisionLadders.com

      B. Substitution requests will be considered in accordance with provisions of Section 01 60 00.

      2.2 FIXED ALUMINUM INDUSTRIAL STAIR

      A. Fixed Aluminum Industrial Stair and Components: Stair, mounting brackets and guardrail/handrails on both sides.

      1. Model: PS-** (** = height in vertical inches) Fixed Aluminum Industrial Stair as manufactured by Precision Ladders, LLC.

      2. Capacity: Unit shall support a 1,000 lb (454 kg) total load without failure.

      3. Degree of Incline: 30 to 45 degrees. Stairs have uniform riser heights and tread depths between landings. Not all degrees are available for every height.

      4. Performance Standard: Units designed and manufactured to meet or exceed OSHA 1910.25.

      B. Components:

      1. Stair Stringer: 8 inch by 2.29 inch by 1/4 inch (203 mm by 58 mm by 6 mm) extruded 6005-T5 structural aluminum channel.

      2. Stair Treads: Aluminum (6005-T5) bar grating treads. Treads to be both welded and bolted to stringer with 3/8 inch round stainless steel hex bolts. (Tread depth determined by rise & run.)

      3. Stair Mounting Brackets:

      a. Floor Brackets: 4 inch by 4 inch by 1/4 inch (102 mm by 102 mm by 6 mm) aluminum angle.

      b. Top Bracket: 4 inch to 6 inch tall by 2 inch mounting flange by 1/4 inch thick by 6 inch by 10 inch long aluminum angle. (Top mounting bracket size is determined by stair’s rise & run.)

      4. Handrails: 1-1/4 inch Schedule 40 aluminum pipe (6005-T5) providing a 1.6 inch OD. Internal aluminum fittings. Welds will be raised but smooth.

      5. Platform:

      a. Surface: Aluminum (6005-T5) bar grating treads.

      b. Toe Boards: 4 inch by 1/4” 6005 T-5 aluminum.

      c. Handrails: 1-1/4 inch Schedule 40 aluminum pipe (6005-T5) providing a 1.6 inch OD.

      6. Finishes:

      a. Standard: Mill finish on aluminum stair components.

      b. Optional Finish: Powder Coated

      C. Options

      1. Tread material: aluminum (6005-T5) formed anti-slip plate.

      2. Crossover stairs with platform between two stairs.

      2.3 FABRICATION

      A. Completely fabricate stair ready for installation before shipment to the site.

      PART 3 EXECUTION

      3.1 EXAMINATION

      A. If substrate preparation is the responsibility of another installer, notify Architect of unsatisfactory preparation before proceeding.

      B. Examine materials upon arrival at site. Notify the carrier and manufacturer of any damage.

      3.2 INSTALLATION

      A. Install in accordance with approved submittals.

      3.3 PROTECTION

      A. Protect installed products until completion of project.

      B. Touch-up, repair or replace damaged products before Substantial Completion.

      END OF SECTION

    技术规格
    • 唯一参考fixed-industrial-stairs
    • 产品系列Stairs
    • 产品组Fixed Industrial
    • 类型对象(单个对象)
    • 发布日期2021-08-26
    • 版本号1
    相关
    • 主材料
    • 设计国家/地区美国
    • 制造国家/地区美国
    分类
    • BIMobject 类别建筑 - 楼梯
    • IFC 分类楼梯
    • Uniclass 2015 代码EF_35_10
    • Uniclass 2015 说明Stairs
    • OmniClass 编号23-17 23 17
    • OmniClass 标题Stairs
    • CSI UniFormat II 代码C2010
    • CSI UniFormat II 标题Stair Construction

    发售地区

    北美
    伯利兹
    加拿大
    危地马拉
    古巴
    哥斯达黎加
    圣卢西亚
    圣基茨和尼维斯
    圣巴泰勒米
    圣皮埃尔和密克隆群岛
    多米尼克
    多米尼加共和国
    安圭拉
    安提瓜和巴布达
    尼加拉瓜
    巴哈马
    巴巴多斯
    巴拿马
    库拉索
    开曼群岛
    格林纳达
    格陵兰岛
    法属圣马丁
    波多黎各
    洪都拉斯
    海地
    牙买加
    特克斯和凯科斯群岛
    特立尼达和多巴哥
    瓜德罗普
    百慕大
    美国
    美属维尔京群岛
    聖文森與格瑞那丁
    英属维尔京群岛
    荷属圣马丁
    荷蘭加勒比區
    萨尔瓦多
    蒙塞拉特岛
    阿鲁巴
    马提尼克
    墨西哥