只需单击一下,即可将族直接加载到您的 Revit 模型中
获取一个更轻松地访问新对象、存储 Revit 族以及与团队协作的地方。
直接与 Revit 旁边的 BIM 对象一起工作
2GB 云存储 - 存储您的 Revit 内容
直接从 Revit 获取内含碳 LCA (A1-A3)
The Connected Flood Control System (Model FCIS) shall consist of a Reduced Pressure Principle Assembly (RP) (Model 375ASTW1, 375AW1, 375W1), a Solenoid Control Valve(SCV) (Model ZW206), and a Zurn Relief Valve Monitor and shall be constructed and tested at the factory as a complete assembly. The RP shall be certified to NSF/ANSI/CAN 61 & 372, and shall be ASSE 1013 Listed. The RP shall be furnished with full port, resilient seated shut-off valves, and shall be equipped with an integral Relief Valve Monitor that monitors the Relief Valve in a closed position. The seat ring and the check valves shall be Noryl, the stems and springs shall be Stainless Steel, and the elastomers shall be EPDM. The SCV shall be a single seated, line-pressure-operated, diaphragm-actuated, pilot-controlled valve. The SCV shall seal by means of a corrosion-resistant seat and a resilient, rectangular seat disc. The stem of the SCV shall be guided top and bottom by integral bushings, and shall contain no packing glands or stuffing boxes. The SCV shall be protected with internal and external FDA approved epoxy coating, and the diaphragm shall not be used as a seating surface. The Relief Valve Monitor shall have an input voltage of 120 VAC, and shall be provided with an output of 24 VDC controlled by a relay. The Relief Valve Monitor shall be housed in a water-tight NEMA enclosure, and shall have both normally open and normally closed outputs. The three components, the RP, SVC, and Relief Valve Monitor, when combined together, automatically shut off the water supply in the event of catastrophic relief valve discharge. The Reduced Pressure Principle Assembly, Solenoid Control Valve, and assembled as a complete unit shall be the WILKINS FCIS.
Compliance:
Features:
发售地区
| 北美 |
|---|
伯利兹 |
加拿大 |
危地马拉 |
古巴 |
哥斯达黎加 |
圣卢西亚 |
圣基茨和尼维斯 |
圣巴泰勒米 |
圣皮埃尔和密克隆群岛 |
多米尼克 |
多米尼加共和国 |
安圭拉 |
安提瓜和巴布达 |
尼加拉瓜 |
巴哈马 |
巴巴多斯 |
巴拿马 |
库拉索 |
开曼群岛 |
格林纳达 |
格陵兰岛 |
法属圣马丁 |
波多黎各 |
洪都拉斯 |
海地 |
牙买加 |
特克斯和凯科斯群岛 |
特立尼达和多巴哥 |
瓜德罗普 |
百慕大 |
美国 |
美属维尔京群岛 |
聖文森與格瑞那丁 |
英属维尔京群岛 |
荷属圣马丁 |
荷蘭加勒比區 |
萨尔瓦多 |
蒙塞拉特岛 |
阿鲁巴 |
马提尼克 |
墨西哥 |

Revit 版 Design App
只需单击一下,即可将族直接加载到您的 Revit 模型中
获取一个更轻松地访问新对象、存储 Revit 族以及与团队协作的地方。