我们正在使用 cookie 提供我们的服务

使用我们的服务即表明您同意我们使用 cookie

;

AT Ytong Monolithic wall - premium U=0,19 W/(m²K) d=424 mm

唯一参考号: COM_AT_Y_premium_monolithic_d_424
品牌: Ytong
产品系列: Ytong AAC
产品组: Composite
宽度 (毫米): 1000
高度 (毫米): 1000
深度 (毫米): 424
发布日期: 2017-09-14
版本号: 1
类型: 对象(单个对象)
下载 (8)
The Ytong Thermoblock (plus) is suitable for all bearing and reinforcing walls. The low dimensional tolerance and the tongue and groove profiling enable rapid processing in the thin-bed method with a joint thickness of 1 mm. The result is a high-quality and homogeneous masonry with excellent thermal insulation. Due to the low weight, aerated concrete blocks are also suitable for internal walls to be retrofitted as well as for reconstruction and renovation measures.
The ecological and non-combustible material also makes the construction materials extremely safe and allows their safe use.

Advantages:
- thermal conductivity from λ = 0.08 W/(mK)
- Homogeneous, monolithic - without additional insulation
- Provides healthy, balanced room climate
- Very high fire protection level: EI90 from 7.5 cm
- Economical and stable in value
- Ergonomic processing

Wall kit for load-bearing premium monolithic walls, made of Ytong Thermoblock plus PV 2-0,35 units d=400 mm.

Construction - U=0,19 W/(m²K)

15 mm Internal plastering (e.g. lime-gypsum-cement plaster)
400 mm Ytong Ytong Thermoblock plus PV 2-0,35 GTIN: 405464032873
6 mm Reinforcement layer plaster with mesh / reinforcement fabric
3 mm Silicone-resin plaster

During planning and bulding the masonry shall be taken into account: ÖNORM EN 1996 including the national annexes, ÖNORM B 3209, ÖNORM B 3358-4 as well as statutory and private-law regulations.

Technical characteristics of the Ytong masonry:
Converted average unit compressive strength fB = 2.5 N/mm²
Characteristic masonry compressive strength fK = 1.63 N/mm²
Characteristic initial shear strength of masonry fvk0 = 0.30 N/mm²
Calculated dead load γ = 3.78 kN/m³
Calculated thermal conductivity λ = 0.08 W/(mK)
Heat storage capacity c = 1.0 MJ/kg
Weighted sound reduction index (construction) Rw = 44.7 dB
Fire resistance class REI-M 90

The present tool supports you in the planning of masonry made of Ytong Thermoblocks, but it does not replace the own technical examination by the user with respect to the intended use and suitability. The use of the tool and changes within the tool must therefore be verified independently. The object proposed by the system must conform to local regulations. The use of the object must therefore be verified independently.


材料(主): Autoclaved aerated concrete
材料(次): Plaster
设计于: Austria
制造于: Austria

BIMobject类别: 墙壁 - 外墙
IFC分类: Wall
UNSPSC名称: Bricks
UNSPSC代码: 301316
Uniclass 1.4 代码: L83122
Uniclass 1.4 描述: Wall units
Uniclass 2.0 代码: SS-25-13-50
Uniclass 2.0 描述: Masonry Wall Systems
Uniclass 2015 代码: Ss_25_13_50
Uniclass 2015 描述: Masonry wall systems
NBS Reference 代码: 25-13-50
NBS Reference 描述: Masonry Wall Systems
CSI MasterFormat 2014 Code: 04 22 26
CSI MasterFormat 2014 Title: Autoclaved Aerated Concrete Unit Masonry
OmniClass编号: 23-13 35 21 13
OmniClass标题: Masonry Structural Walls
CSI UniFormat II Code: B2010
CSI UniFormat II Title: Exterior Walls
这个产品提供于:
Europe
  • Austria

所有 BIM 对象都来自于得到确认和批准的真实制造商