Publikovat produkty
Model 8611 Corner RiserPACK
Model 8611 Corner RiserPACK
Model 8611 Corner RiserPACK
Model 8611 Corner RiserPACK

    Model 8611 Corner RiserPACK

    4.6 out of 5 stars4.6(10 reviews)

    AGF's commercial RiserPACK Model 8611 is a riser manifold for NFPA 13 fire sprinkler systems and is designed to fit into a corner to minimize protruding and comply with ADA Standards. Model 8611 includes a flow switch, TESTanDRAIN Model 1011A with included pressure relief valve and trim, Model 7600 3-way universal gauge valve, and a Model 7500 pressure gauge. Available with a steel body in sizes 2"-6", orifice sizes 3/8" (K 2.8) - 25K, and a groove x groove connection. AGF's corner manifold is available with a right or left drain to accommodate every installation configuration.

    Specifikace
    • Model 8611 Commercial Corner RiserPACK

      1. 2.1 SPRINKLER SPECIALTY PIPE FITTINGS - Flow Detection and Test Assemblies:
        1. Product: Commercial Model M8611. Includes a flow switch, TESTanDRAIN Model 1011A, Model 7600 3-way Globe Valve, and a M7500 Pressure Gauge and a model M7000 Pressure Relief Valve.
          1. Riser Model: Pre-Assembled TESTanDRAIN Riser 2, 2-1/2, 3, 4, and 6 inches (51mm, 64 mm, 76 mm, 102 mm, 152 mm):
            1. Inlet and Outlet (Schedule 10 steel): Grooved 2, 2-1/2, 3, 4 and 6 inches (51mm, 64 mm, 76 mm, 102 mm, 152 mm) Models.
            2. Schedule 10 fabricated steel body with 3mil (.08 mm) powder coated red finish.
            3. Standard: UL's "Product iQ" listing, or "Approval Guide," published by FM Global, listing. NFPA 13.
            4. Pressure Rating: 300 psig (2070 kPa).
            5. Size: Same as connected piping.

      ** NOTE TO SPECIFIER ** Delete valve not required.

      1. Valve Model 1011 TESTanDRAIN valve for a 2 inch (51 mm) Model:
        1. 1 inch (25 mm) FNPT.

      ** NOTE TO SPECIFIER ** Delete orifice size not required.

      1. Test Orifice Size: Nominal 2.8K (3/8 inch) , as required by NFPA 13, latest edition.
      2. Test Orifice Size: Nominal 4.2K (7/16 inch), as required by NFPA 13, latest edition.
      3. Test Orifice Size: Nominal 5.6K (1/2 inch), as required by NFPA 13, latest edition.
      4. Test Orifice Size: Nominal 8.0K (17/32 inch), as required by NFPA 13, latest edition.
      5. Test Orifice Size: Nominal 11.2K (5/8 inch, ELO), as required by NFPA 13, latest edition

      ** NOTE TO SPECIFIER ** Delete orifice size not required.

      1. Test Orifice Size: Nominal 2.8K (3/8 inch) , as required by NFPA 13, latest edition.
      2. Test Orifice Size: Nominal 4.2K (7/16 inch), as required by NFPA 13, latest edition.
      3. Test Orifice Size: Nominal 5.6K (1/2 inch), as required by NFPA 13, latest edition.
      4. Test Orifice Size: Nominal 8.0K (17/32 inch), as required by NFPA 13, latest edition.
      5. Test Orifice Size: Nominal 11.2K (5/8 inch, ELO), as required by NFPA 13, latest edition.
      6. Test Orifice Size: Nominal 14.0K (3/4 inch, ESFR), as required by NFPA 13, latest edition.
      1. Valve Model 1011 TESTanDRAIN valve for a 4 or 6 inch (102 mm, 152 mm) Models:
        1. 2 inch FNPT.

      ** NOTE TO SPECIFIER ** Delete orifice size not required.

      1. Test Orifice Size: Nominal 2.8K (3/8 inch) , as required by NFPA 13, latest edition.
      2. Test Orifice Size: Nominal 4.2K (7/16 inch), as required by NFPA 13, latest edition.
      3. Test Orifice Size: Nominal 5.6K (1/2 inch), as required by NFPA 13, latest edition.
      4. Test Orifice Size: Nominal 8.0K (17/32 inch), as required by NFPA 13, latest edition.
      5. Test Orifice Size: Nominal 11.2K (5/8 inch, ELO), as required by NFPA 13, latest edition.
      6. Test Orifice Size: Nominal 14.0K (3/4 inch, ESFR), as required by NFPA 13, latest edition.
      7. Test Orifice Size: Nominal 25.2K, as required by NFPA 13, latest edition.
      8. Water flow alarm switch.
      9. Pressure Gauge: AGF Model 7500.
      10. 1/4 inch, 3-way globe valve: AGF Model 7600
      11. Pressure Relief Valve and Drainage Piping: AGF Model 7000 or AGF Lockable Model 7000L

      ** NOTE TO SPECIFIER ** Delete pressure rating not required.

      1. Pressure Rating: Factory rated at 175 PSI.
      2. Pressure Rating: 200 PSI.
      3. Pressure Rating: 225 PSI.
      4. Pressure Rating: 300 PSI.
      5. Body Material: Bronze body and stainless steel spring.
      6. Components: Nylobraid flexible tube, Two 1/2 inch (13 mm) NPT by barbed 90 degree elbows, external identification plate and integral flushing handle to remove debris.
      7. 1/2 inch (13 mm) MIPT inlet, 1/2 inch (13 mm) FIPT outlet.
      8. Relief pressure shall be factory set to project specifications.
      9. Relief valve shall operate to the OPEN position between 90% and 105% of the set pressure.
      10. Relief valve shall reseat or CLOSE at a minimum of 80% of set pressure.
    Technická specifikace
    • Jedinečná ref. hodnotaAGF-Corner-Riser
    • Skupina výrobkůAGF Fire Sprinkler Products
    • Skupina produktůRiserPACK®
    • Datum zveřejnění2022-03-02
    • Číslo vydání1
    Související
    • Hlavní materiálOcel lakovaná
    • Navrženo vSpojené státy americké
    • Vyrobeno vSpojené státy americké
    Klasifikace
    • Kategorie objektu BIMProtipožární produkty - Zavlažovací systémy
    • Kód CSI MasterFormat 201421 00 00
    • Název CSI MasterFormat 2014Fire Suppression
    • Číslo OmniClass23-29 33 00
    • Název OmniClassFire Suppression System Components
    • Kód CSI UniFormat IID40
    • Název CSI UniFormat IIFIRE PROTECTION

    Dostupnost regionu

    Asie Evropa Afrika Jižní Amerika Oceánie Severní Amerika
    Afghánistán
    Albánie
    Alžírsko
    Argentina
    Austrálie
    Bahamy
    Arménie
    Belgie
    Angola
    Bolívie
    Fidži
    Belize
    Ázerbájdžán
    Bělorusko
    Benin
    Brazílie
    Nová Kaledonie
    Dominikánská republika
    Bangladéš
    Bosna a Hercegovina
    Botswana
    Chile
    Nový Zéland
    Grónsko
    Bhútán
    Bulharsko
    Burkina Faso
    Ekvádor
    Papua-Nová Guinea
    Guatemala
    Čína
    Černá Hora
    Burundi
    Falklandy (Malvíny)
    Šalamounovy ostrovy
    Haiti
    Filipíny
    Česká republika
    Čad
    Francouzská Guyana
    Vanuatu
    Honduras
    Gruzie
    Chorvatsko
    Demokratická republika Kongo
    Guyana
    Východní Timor
    Jamajka
    Indie
    Dánsko
    Džibuti
    Kolumbie
    Kanada
    Indonésie
    Estonsko
    Egypt
    Paraguay
    Kostarika
    Irák
    Finsko
    Eritrea
    Peru
    Kuba
    Írán
    Francie
    Etiopie
    Surinam
    Mexiko
    Izrael
    Irsko
    Gabon
    Uruguay
    Nikaragua
    Japonsko
    Island
    Gambie
    Venezuela
    Panama
    Jemen
    Itálie
    Ghana
    Portoriko
    Jordánsko
    Jan Mayen
    Guinea
    Salvador
    Kambodža
    Kypr
    Guinea Bissau
    Spojené státy americké
    Katar
    Litva
    Jihoafrická republika
    Kazachstán
    Lotyšsko
    Jižní Súdán
    Korejská lidově demokratická republika
    Lucembursko
    Kamerun
    Korejská republika
    Maďarsko
    Keňa
    Kuvajt
    Moldavsko
    Kongo
    Kyrgyzstán
    Německo
    Lesotho
    Laos
    Nizozemsko
    Libérie
    Libanon
    Norsko
    Lybie
    Malajsie
    Polsko
    Madagaskar
    Mongolsko
    Portugalsko
    Malawi
    Myanmar (Barma)
    Rakousko
    Mali
    Nepál
    Řecko
    Maroko
    Omán
    Rumunsko
    Mauritánie
    Pákistán
    Rusko
    Mosambik
    Palestinská území
    Severní Makedonie
    Namibie
    Saúdská Arábie
    Slovensko
    Niger
    Spojené arabské emiráty
    Slovinsko
    Nigérie
    Šrí Lanka
    Španělsko
    Pobřeží slonoviny
    Sýrie
    Srbsko
    Rovníková Guinea
    Tádžikistán
    Švédsko
    Rwanda
    Tchaj-wan
    Švýcarsko
    Senegal
    Thajsko
    Ukrajina
    Sierra Leone
    Turecko
    Velká Británie
    Somálsko
    Turkmenistán
    Středoafrická republika
    Uzbekistán
    Súdán
    Vietnam
    Svazijsko
    Tanzánie
    Togo
    Tunisko
    Uganda
    Zambie
    Západní Sahara
    Zimbabwe