Industrial Control Tunnel Damper - Airfoil Parallel Blade - TD-93

Standard Construction

Frame: 8" x 2" x 12 gauge (203 x 51 x 2.8) galvanized steel channel.

Blades: 14 gauge (2) 6063-T5 extruded aluminum airfoil with metal-to-metal blade overlap. Parallel.

Axles: 3/4" (19) diameter stainless steel.

Linkage: 3/16" x 3/4" (5 x 19) tie bars and 3/8" (10) pivot pins concealed in frame. All components are stainless steel.

Bearings: Oil impregnated sintered stainless steel sleeve pressed into frame.

Control Shaft: 3/4" x 10" (19 x 254) round drive axle with shaft support bracket and bearing mounted to damper frame with factory mounted manual locking quadrant.

Blade Seal: Silicone, mechanically locked into blade.

Jamb Seal: Flexible stainless steel compression type.

Lifting Lugs: 7/8" (22) diameter, one on each jamb of frame.

Minimum Size:
12" x 12" (305 x 305)

Maximum Size:
Single Section: 48" x 96" (1219 x 2438)
Multiple Section: Unlimited

Ratings

Leakage:
1.3 cfm/ft² @ 2.0 in. wg. (0.007 m³/s/m² @ 0.5 kPa)
2.0 cfm/ft² @ 5.0 in. wg. (0.01 m³/s/m² @ 1.25 kPa)
4.0 cfm/ft² @ 8.0 in. wg. (0.02 m³/s/m² @ 2.0 kPa)
8.0 cfm/ft² @ 15.0 in. wg. (0.04 m³/s/m² @ 3.75 kPa)
34.0 cfm/ft² @ 22.0 in. wg. (0.17 m³/s/m² @ 5.5 kPa)

Temperature:
482⁰F (250⁰C) for 1 hour per NFPA-130