Publicer dine produkter

VK154 - Standard Response Dry Pendent Sprinklers (K5.6)

The Viking Corporation

Arkiveret

VK154 - Standard Response Dry Pendent Sprinklers (K5.6)

Viking Standard Response Dry Pendent Sprinklers are thermosensitive spray sprinklers suitable for use in areas subject to freezing. The sprinklers are designed for dry systems and preaction systems where it is necessary to prevent water or condensation from entering the drop nipple before sprinkler operation. They may also be installed in spaces subject to freezing and supplied from a wet system in an adjacent heated area. The special Polyester and Electroless Nickel PTFE (ENT) coatings are listed/approved for installation in corrosive environments. Refer to technical data sheet for design and installation requirements.

Specifikation

K-Factor: K5.6 (80)
Manufacturer: Viking
Page: F_071591
Part Number: 07740U,07854U,09341,06530U,07853U,09342,07852U,07855U,09343
VK Number: VK154
Additional Information: NOTICE: The product details indicated below are for general reference only and may vary based on the specific product approval and/or application. Always verify product details with the technical data sheet and consult with the Authority Having Jurisdiction (AHJ).
Max Pressure: 175 psi (12 bar)
Response Type: Standard
Occupancy Type: Extra, Light, Ordinary
Thread Size: 1" NPT (25 mm BSP)
Min Spacing: 6 ft (1,8 m) cULus; Per FM datasheet
Max Spacing: Per Standards / Listings

Teknisk specifikation

Unik ref.vk154-standard-response-pendent-sprinkler-k56
ProduktfamilieViking Dry Barrel Sprinklers
ProduktgruppeViking - Dry Pendent Adjustable Esc / Pendent
TypeObjekt (enkelt objekt)
Udgivelsesdato2021-01-25
Udgavenummer1

Links

Produkt-URLhttps://www.vikinggroupinc.com/vk150-vk151-vk154-vk155-vk158-vk159-standard-response-dry-pendent-sprinklers-k56
Produktcertificeringhttps://www.vikinggroupinc.com/sites/default/files/documents/071591.pdf
Teknisk beskrivelsehttps://www.vikinggroupinc.com/sites/default/files/documents/071591.pdf

Relateret

Designet iUSA
Fremstillet iUSA

Klassifikation

BIMobject-kategoriBrandprodukter - Sprinklersystemer
ETIM-kodeEC011373
ETIM-navnDry sprinkler
UNSPSC-navnFire sprinkler heads
UNSPSC-kode46191610
Uniclass 2015-kodePr_70_55_97_84
Uniclass 2015-beskrivelseSprinkler heads
CSI MasterFormat 2014-kode21 13 00
CSI MasterFormat 2014-titelFire-Suppression Sprinkler Systems
OmniClass-nummer23-29 33 11 11 13
OmniClass-betegnelseDry Pendant Sprinkler Heads
CSI UniFormat II-kodeD4010
CSI UniFormat II-titelSprinklers

Tilsvarende produkter

billede til Model 7000L - Pressure Relief Valves

AGF Manufacturing Model 7000L - Pressure Relief Valves

billede til Model 8011 Commercial RiserPACK® - Prepackage Commercial Riser Assembly

AGF Manufacturing Model 8011 Commercial RiserPACK® - Prepackage Commercial Riser Assembly

4.5 (11)

billede til FP23 Couplings

Zurn FP23 Couplings

billede til Model 1011T TESTanDRAIN® - Single Handle Ball Valve

AGF Manufacturing Model 1011T TESTanDRAIN® - Single Handle Ball Valve

billede til Wilkins FP56 - Crosses

Zurn Wilkins FP56 - Crosses

3.8 (5)

billede til RED FIRE Fittings

Heliroma RED FIRE Fittings

Common.Footer.ValueProp.Image.AltText

Design App til Revit

Indlæs familier direkte ind i din Revit-model med ét klik

Få et sted til at få adgang til nye objekter nemmere, opbevar dine Revit-familier og samarbejd med dit team.

Arbejd direkte med BIM-objekter ved siden af Revit
2 GB cloudlager – gem dit Revit-indhold
Få integreret CO2-LCA (A1-A3) direkte fra Revit