This website uses cookies for functionality, to tailor and personalize your experience as well as for analytics, advertising and other purposes. By clicking the “I agree” button you agree to all cookies (including first and third party cookies). If you wish to limit or deny cookies you can do so in your web browser. You can also read more about applicable cookies and your choices here !

I agree
;

AAV-TEE Redi Vent Air Admittance Valve with Tubular Adaptor

Unique ref.: ips-20391
Brand: IPS Corporation
Product family: General Pipework and Ductwork Products
Product group: Studor®
Date of publishing: 2018-08-31
Edition number: 1
Type: Object (single object)
Download (2)

An air admittance valve shall be acceptable as a vent termination for any individual vent, common vent, circuit vent, loop vent and island fixture vent that is provided to prevent siphonage of a fixture trap.  An air admittance valve can be used as an alternative to extending a vent through the roof (or sidewall) to the open atmosphere.

Location:

  • The air admittance valve shall be located a minimum of 4” above the horizontal branch drain or fixture drain being vented.
  • Each valve should be installed in an accessible location.

Installation:

  • The valve should be connected to the piping in accordance with the manufacturer’s installation instructions.
  • The valve should be installed in the vertical, upright position after rough-in and pressure testing of the DWV system.
  • A minimum of one vent shall extend to the open atmosphere for ever building drainage system.
  • The valve should not be installed as a vent terminal for any special (chemical) waste system or in supply and return air plenums.
  • For installation in areas with temperature range between –40 and 150 degrees F.

Features:

  • Screening on the inside and outside of the valve to protect the sealing assembly from insects and debris.
  • Will vent up to 20 DFUs on a horizontal branch and 24 DFUs on a stack.
  • Limited lifetime warranty for replacement of defective valves.

Materials:

  • ABS (acrylonitrile butadiene styrene) valve with silicone membrane
  • ABS or PVC (adaptor)

Performance Standards: ANSI/ASSE 1051—2009 single fixture and branch type AAVs ANSI/ASSE 1050—2009 stack type AAVs NSF Standard 14—2009 Plastics Piping System and Components

Code Compliance:

  • International Plumbing Code (IPC)
  • International Residential Code (IRC)
  • Uniform Plumbing Code (UPC Section 301.2 Alternative Materials and Methods
  • National Standard Plumbing Code (NSPC)—Appendix “E”
  • National Plumbing Code of Canada (NPC)


Material main: PVC
Material secondary:
Designed in: United States
Manufactured in: United States

BIMobject Category: Plumbing - Pipes
Uniclass 1.4 Code: L7313
Uniclass 1.4 Description: Sanitary above ground pipes and fittings
Uniclass 2.0 Code: SS-35-65-70-75
Uniclass 2.0 Description: Sanitary Accessory Systems
Uniclass 2015 Code: Ss_40_15_75_75
Uniclass 2015 Description: Sanitary accessory systems
CSI MasterFormat 2014 Code: 22 13 16
CSI MasterFormat 2014 Title: Sanitary Waste and Vent Piping
OmniClass Number: 23-31 00 00
OmniClass Title: Plumbing Specific Products and Equipment
CSI UniFormat II Code: D2090
CSI UniFormat II Title: Other Plumbing Systems
This product is available in:
North America
  • Canada
  • Mexico
  • Puerto Rico
  • United States
Oceania
  • Australia
  • New Zealand

BIMobject SEEK Properties

Plumbing - Pipes

Name Value
Material PVC

COBie UK

UK.COBie.Type

UK.COBie.Type

This property set allows objects to be COBie UK BIM Level 2 classified

Name Value
Material PVC

BIMobject®